1. Set the DC cigarette lighter adapter's voltage switch to 4.5V.
2. Line up the 5.5 mm outer diameter/2.1 mm inner diameter bar-
rel plug with the adapter's socket so it reads –TIP, and insert
the plug into the socket.
3. Insert the adapter's barrel plug into the receiver's
jack.
4. Insert the adapter's plug into the vehicle's cigarette-lighter
socket.
ADJUSTING THE ANTENNAS
FM/SW — For the best FM and short-
wave reception, pull up the telescoping
antenna's base, then fully extend the an-
tenna and position it for the best recep-
tion.
MW (AM) — For the best MW reception,
rotate the receiver. The receiver uses a
built-in antenna for this band.
DC IN 4.5 V
(Illus)
(Illus)
7