Removing Harness System - Cosco APT 50 User Manual

Removing Harness System

XXXXX
Only remove the harness system to clean the seat pad.
1. Fully Loosen Harness
Straps
2. From Back, Remove
Harness Strap Loops
From Splitter Plate
3. Turn Seat Over
Locate harness straps' metal
retainers on bottom of shell.
15
XXXXX
XXXXX
4. Using a Flathead
Screwdriver, Lift Metal
Retainer Off of Tab
Repeat for other side.
5. Push Metal Retainer
Up Through Shell and
Pad As Shown
Repeat for other side.
6. Locate Buckle's Metal
Retainer on Bottom of
Shell
7. Rotate Metal Retainer
and Push It Up Through
Shell and Pad
16
continued on next page