Tuning To A Radio Station - Radio Shack DX-396 Owner's Manual

Am/sw/fm stereo pll portable receiver
Table of Contents

Advertisement

2. Press
SW SELECT
for 10 seconds.
3. While
flashes, press the desired
m
band key (
120m
The receiver tunes to the lowest fre-
quency in the selected band.

Tuning to a Radio Station

You can tune to a station using the man-
ual, search, direct access, preset, or
scan tuning methods.
• Up-Down Manual
To manually tune to a frequency,
repeatedly press
play shows the desired frequency.
• Search
To let the receiver find a station,
press and hold
2 seconds. The tuner rapidly scans
all frequencies. When you release
the button, the receiver automati-
cally tunes to the next strong sta-
tion.
Note: As the receiver rapidly scans
for a station, you will be able to hear
the sounds broadcast from the
passing frequencies.
• Direct Access
To tune directly to a station's fre-
quency,
press
flashes for about 10 seconds. While
it is flashing, press the number but-
tons to select the desired station's
frequency.
again.
.
m
(meter) flashes
-
).
13m
or
until the dis-
<
>
or
for more than
<
>
.
ENTRY
ENTER
Then
press
ENTER
Notes:
• Your
receiver
rounds the entered frequency to
the nearest valid frequency. For
example, if you try to enter a fre-
quency of 1453 in AM, your
receiver accepts it as 1450. (See
"Setting the AM/FM Tuning Incre-
ment" on Page 8.)
• If you make a mistake in entering
a frequency,
display.
Enter
again.
• Preset
To tune directly to a station that is
entered into memory, simply press
the desired preset number (
Note: You must first store the
desired stations into memory. (See
"Storing Station Frequencies" on
Page 12.)
• Scan
To scan the preset memory loca-
tions, press
SCAN
stops at each station for about 5
seconds. To end scanning, press
again, or press a preset sta-
SCAN
tion memory button.
Note: If no frequency is stored in a
memory channel or no signal is
received at a memory channel, the
receiver stops at the memory chan-
nel for 1 second and then moves to
the next memory channel.
automatically
EEEE
flashes on the
the
frequency
).
0
9
. The receiver
11

Advertisement

Table of Contents
loading

Table of Contents