Related Manuals for Rear view safety RVS-3710-DVR
Summary of Contents for Rear view safety RVS-3710-DVR
- Page 1 Instruction Manual 7" Digital Quad View Color Monitor with Built-in DVR RVS-3710-DVR...
-
Page 2: Table Of Contents
Warranty......30 Disclaimer......31 Rear View Safety... -
Page 3: Introduction
NOTE! Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. Congratulations on purchasing a Rear View Backup Camera System! With this manual you will be able to properly install and operate the unit. The Backup Camera System is intended to be installed as a supplement aid to your standard rear view mirror that already exists in your vehicle. -
Page 4: Safety Information
Rear View Camera System. If you back up while looking only at the monitor, you may cause Rear View Safety... - Page 5 INSTALLATION: • Electric shock or product or disconnected wire may cause a malfunction may occur if this fire. product is installed incorrectly. • While installing the Rear View System be careful with the wire • Use this product within positioning in order to avoid wire the voltage range specified.
- Page 6 If you have questions about this product, contact: Rear View Safety 1797 Atlantic Avenue Brooklyn, NY 11233 Tel: 1.800.764.1028 IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
-
Page 7: Before Beginning Installation
Before drilling please check that no cable or wiring is on the other side of the wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot/moving parts and electrical noisy components. We recommend doing a benchmark test before installation to insure that all components are working properly. -
Page 8: System Introduction
System Introduction 1) USB Port: Connect external mouse / USB drive 2) Removable Sunshade 3) Location of power harness 4) GPS Antenna Port 5) SD Slot: System records onto SD Card (sold separately) Rear View Safety... -
Page 9: Package Contents
Package Contents 1) 7" Digital Quad View Color Monitor with Built-in DVR 2) Power Harness 3) GPS Module 4) U-Bracket (with installation screws) Mounting Options 1) Butterfly mounting bracket (sold separately) 2) U-bracket 3) Vertical monitor mount Reverse With Confidence ™... -
Page 10: Monitor Introduction
Power, CH1, CH2, CH3, CH4, Split Button, HOME POWER: Turn on monitor Ch1/2/3/4: Toggle between channels Split Button: Toggle between multiple viewing options Home: Return to main interface Rear View Safety... -
Page 11: System Display
System Display Below is the default interface. Touch Screen Touch the lower middle part of screen to bring up shortcut menu options The shortcut menu options are Playback, Event, Monitor and System Reverse With Confidence ™... -
Page 12: Login
As shown below, you need to enter the user name and password. Press OK without entering a password, you can set a password from the menu. Pressing password field will display a keyboard. Rear View Safety... -
Page 13: Main Menu
Main Menu System Settings Items shown below in system settings: General Settings, Video Settings, Re- cord Settings, Alarm setting, Monitor Display and Return. Reverse With Confidence ™... -
Page 14: General Settings
Use general settings to change system time then press set time to con- firm. Date Format: Toggle between year/month/day, month/day/year, day/ month/year Time Format: Toggle 24/12 hour GPS Time: When enabled, GPS will determine time Time Zone: Change time zone Rear View Safety... -
Page 15: Video Settings
Video Settings Channel: Select channel Encode Size: Toggle image quality, select from CIF/HALF D1/ D1/960H/720p/1080N Bit Stream Ctr: Toggle Fixed Stream/Dynamic Stream Encode Quality: Toggle best/very good/good/medium/poor/worst Frame: Toggle frames per second Bitstream: Toggle 303/455/607/911/1214/1518kbps Overlay: Toggle time/plate/chan/GPS overlay ON/OFF. Set desired posi- tion, then press home to return to video settings. -
Page 16: Record Settings
Look Recording: Loop recording allows overwriting of SD card when full. Toggle ON/Off. Loop Length: Change length of each video segment, toggle between 1-60 minutes. Video Format: Toggle PAL/NTSC Schedule Rec: Choose between stop rec/manual rec/auto rec Rear View Safety... -
Page 17: Alarm Control
Alarm Control Enable: Toggle alarm ON/OFF Alarm Input: Toggle alarm channel Dev Type: Select high level/low level Alarm Delay: Toggle delay time Rec Channel: Will begin recording on selected channel(s) when alarm occurs Periods of Time: Manually set times for alarms Alarm Output: Choose between Screen Display, I/O Output Reverse With Confidence ™... -
Page 18: Motion Detection
Alarm Delay: Toggle delay (secs) after start of the alarm prompt and video Region: Select area of display to be included in motion detection Sensitivity: Toggle motion detection sensitivity Rec Channel: What channels will be recorded with motion detection Rear View Safety... -
Page 19: Monitor Display
Monitor Display Channel Name: Adjust channel names Rolling Display/Display Time: Turn on automatic display changes and determine display time. Full Page/Two Page: Toggle what channels are included Preview Time: Toggle time ON/OFF Reverse With Confidence ™... -
Page 20: Advanced Options
From the main menu, select advanced options. System Upgrade: System must be updated with a USB device. The system can be automatically restarted after the upgrade. Rear View Safety... -
Page 21: Display Settings
Restore Default: Use this setting to restore factory settings Display Settings: Adjust display settings Brightness: Range 0-100 Contrast: Range 0-100 Saturation: Range 0-100 Output Volume: Range 0-15 Reverse With Confidence ™... -
Page 22: User Accounts
User Accounts Use this setting to modify password/access Modify Password: Enter the current password, confirm identity, enter the new password, and confirm the password Rear View Safety... -
Page 23: Modify Access
Modify Access Use this setting to adjust user permissions From the main menu, select System Information Reverse With Confidence ™... -
Page 24: File Backup
Version info From main menu, select File Backup Rear View Safety... -
Page 25: File Backup
Detection: Detects devices attached to DVR that could be used to back- up files Remove: Removes current device Stop: Stop detection Add: Prompts user to select video file to backup Delete: Deletes selected video Clear: Clears all video in backup box Backup: Backup up all video files to device selected in detection box Back up the video, retrieve it by time, type, or channel, then click the search in the lower left corner to get started. -
Page 26: Format
From the main menu, select format. Without a hard disk or SD card, there is no hard disk capacity information (As shown above). Press format to format hard disks and SD cards. From the main menu, choose Vehicle Settings Rear View Safety... -
Page 27: G-Sensor
Enter vehicle number, company name, license number, driver's name and line number. G-Sensor Reverse With Confidence ™... - Page 28 The footage recorded during Event Mode will not be overwritten. This ensures that you'll be able to pull up these recordings when you need them. Toggle threshold and recording ON/OFF. From the main menu, select Video Playback Rear View Safety...
-
Page 29: Video Playback
Play recorded video files, as shown below. Find video by entering start time, end time, file type, or channel number. The video displayed on the interface can be freely adjusted according to the progress bar. The function keys from left to right are: pause/play, stop, rewind, normal, fast forward, volume adjustment, return to video playback menu, channel display, four channel display, hide progress bar, return to the main menu. -
Page 30: Warranty
OTHERS OR THE UNAUTHORIZED USE OF NONCONFORMING PARTS; THE DAMAGE IS DUE TO NORMAL WEAR AND TEAR, THIS DAMAGE IS DUE TO ABUSE, IMPROPER MAINTENANCE, NEGLECT OR ACCIDENT; OR THE DAMAGE IS DUE TO USE OF THE REAR VIEW SAFETY, INC. SYSTEM AFTER PARTIAL FAILURE OR USE WITH IMPROPER ACCESSORIES. -
Page 31: Disclaimer
FOR ANY INJURY, LOSS OR DAMAGE, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INTENDED USE OF THE PRODUCT. IN NO EVENT SHALL REAR VIEW SAFETY AND/OR ITS AFFILIATES HAVE ANY LIABILITY FOR ANY LOSSES (WHETHER DIRECT OR INDIRECT, IN... - Page 32 If you have any questions about this product, contact: Rear View Safety, Inc. 1797 Atlantic Avenue Brooklyn, NY 11233 800.764.1028 Better Cameras. Better Service. IT’S OUR GUARANTEE.
Need help?
Do you have a question about the RVS-3710-DVR and is the answer not in the manual?
Questions and answers