Connecting Inputs; Low-Level Inputs - Radio Shack XL-110 Owner's Manual

12-2014.fm Page 8 Tuesday, May 9, 2000 8:51 AM
ˆ

Connecting Inputs

LOW-LEVEL INPUTS

You can connect your auto sound system's low-level line out jacks to the amplifier's low-level
line in jacks.
If your auto sound system does not have low-level line out jacks, see "High-Level (Speaker
Wire) Inputs" on Page 9 to connect your amplifier.
Note: For the best results, use shielded audio cables (not supplied) available at your local Ra-
dioShack store.
1. Temporarily place the amplifier as close as possible to the selected mounting location.
2. If your auto sound system has two line out jacks , connect the auto sound system to the
amplifier as shown:
Note: If your auto sound system has four separate line out jacks , use the auto sound sys-
tem's front left and right jacks to make this connection.
8
Right
Left
Auto Sound System
Connecting Inputs