TO SET OR RESET THE ACTUAL TIME
Follow the instructions below to manually set the time. To automatically
set the time with the iPod, see the following page.
1
Press and hold the TIME SET
button 1; the hours will blink.
Within ten seconds, press the
Volume/Time Up 2 and/or Down
3 button on the main unit to set
the current hour.
NOTE: If the 24 hour switch is set
to Off (12 hour mode), be sure to
observe the AM or PM indicators
to make sure you have set the
hour correctly.
3
Press the TIME SET button 1;
the days will blink. Within ten
seconds, press the Volume/Time
Up 2 and/or Down 3 button on
the main unit to set the current
day of the week.
OPERATION (CONTINUED)
1
3
2
ALARM1
ALARM2
1
3
2
ALARM1
ALARM2
2
Press the TIME SET button 1;
the minutes will blink. Within ten
seconds, press the Volume/Time
Up 2 and/or Down 3 button on
the main unit to set the current
minute.
4
Press the TIME SET button (or
wait approx. ten seconds) and the
time and day will be set.
14
1
3
2
ALARM1
ALARM2
ALARM1
ALARM2