Radio Shack PRO-99 Owner's Manual page 41

Police/Fire and SR5 ham
bands. You can turn on or off
the sub-groups by pressing
the group numbers. For
example, to turn off sub-group
2, press
3. In all search bands except
marine and FRS/GMRS/
MURS bands, press
and then
pause the search. To continue
search, press
press
SRCH/PAUSE
In marine and FRS/GMRS/
MURS bands, press
and then
M
is displayed.
S
and now you can search
through the band.
Press
FUNC
SRCH/PAUSE
to the previous mode.
4. Rotate
SQ
leave it set to a point just after
the rushing sound stops. After
2 seconds (if the delay feature
is on), the scanner starts
searching.
5. When the scanner finds an
active frequency, it stops
searching, and resumes when
the transmission ends. If
delay is programmed with the
search range the scanner will
pause for a reply before
search resumes.Ô
.
2
SRCH/PAUSE
, and then
FUNC
again.
SRCH/PAUSE
M
changes to
, and then
again to return
clockwise and
FUNC
to
,
FUNC
while
Ô
NOTES
• In the aircraft and
limit search bands,
press FUNC then
press ^ to start
searching up from
the lowest frequency
or press v to start
searching down from
the highest
frequency.
• You can press ^ or v
at any time to change
the search direction.
• Use ^ or v while
paused to increment
the frequency one
step at a time.
Ô
41