Advertisement
6
Logix Expansion Board for DriveLogix™5730
Step 6: Installing the
DriveLogix5730 Expansion
Board
Step 7: Installing and
Configuring the Options
Which Require the
DriveLogix5730 Expansion
Board
Step 8: Replacing the
Covers and Control
Cassette
A
C
B
Referring to the documentation for the options, install them. Allen-Bradley
publications are available on the internet at
www.rockwellautomation.com/literature.
Document
Compact I/O Cable for DriveLogix5730 Controller
ControlNet Communications Daughtercard (coax)
Installation Instructions
ControlNet Communications Daughtercard (fiber)
Installation Instructions
EtherNet/IP Communications Daughtercard Installation
Instructions
DeviceNet Communications Daughtercard Installation
Instructions
The procedure for replacing the covers and control cassette is the reverse of
removing these components. Refer to
from the Control Cassette on page 5
Cassette from Drive on page
Task
Description
Align connector on DriveLogix5730 Expansion
A
Board with connector on Main Control Board
Place DriveLogix5730 Expansion Board on the
B
Main Control Board
Install and tighten screws (7-10 lb.-in.)
C C
=
C
C
C
Publication Number
20D-IN008...
1788-IN002...
1788-IN005...
1788-IN054...
1788-IN053...
Step 4: Removing the Outside Covers
and
Step 3: Removing the Control
4.
Advertisement
