Advertisement
To install Grommet (E), separate parts
15.)
and press Grommet Sleeve in rectangu-
lar opening in Monitor Platform (P1) as
shown in illustration #6.
Snap 2 plastic Caps over top of Sleeve
as shown in illustration #6.
Grommet (E)
Cap
The Balt product you have purchased is guaranteed against material and workmanship defects. This
guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal
use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common
carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or
implied shall apply. Failure to follow instructions found in Important Information Section of Owner
Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
6
Cap
Sleeve
P1
Cap
Sleeve
Important
Grommet(E) installation
Cap
Illustration # 6
SplitLevel36- 12/30/02
Advertisement
