Balt Split-Level-36 Assembly Instructions Manual page 4

5.) Place the Keyboard Platform (P2) with
the insert nuts facing up. Attach 1 each
Upper Insert (P3) and 1 each Upper Insert
(P4) using 4 each (B) screws.
(Finger tighten only)
Attach Crossbrace (P6) to the
6.)
Upper Inserts (P3 & P4) using 2
Screws (A1) as shown in
illustration #3.
Attach Stability Panel (P5) to
7.)
the Upper Inserts (P3 & P4)
using 4 Screws ( A) as shown
in illustration #3.
8.)
Slide 2 Leg Receivers (P7) over 2
Upper Inserts (P3) and 2 Upper
Inserts (P4) as shown in illustration
#4. Secure at desired height using 8
each (A) Screws and 8 each (C)
Square nuts (flat side of the nut
should be next to the metal).
10.)
Attach Crossbrace (P6)
between Leg Receivers
(P7) using 2 Screws (A1)
as shown in illustration #4.
(Tighten all the screws at this
time using Allen Wrench (G)).
4
P4
F
P6
A1
A
B
A
P5
P6
9.)
P7
C
P4
Illustration # 3
P3
A1
P2
Attach 4 each (F) Leveling
Glides to the 2 each Leg
receivers (P7) .
P7
A
C
P3
Illustration # 4
B