Advertisement
38.
Insert 1 Grommet Sleeve (S) in Round opening in Table Top (P-4) as shown in illustration #14.
39.
Snap Grommet Cap (T) into Grommet Sleeve (S).
40.
Align CPU Door (P-16) With the Right Side Panel (P-2) as shown in illustration #14.
41.
Secure Door Hinges (R) to the Right Side Panel (P-2) using 4 each Wood Screws (A5).
Illustration #14
T
The Balt product you have purchased is guaranteed against material and workmanship defects. This
guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal
use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common
carriers during shipment is not included in this guarantee.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or
implied shall apply. Failure to follow instructions found in Important Information Section of Owner
Sheet shall void the guarantee. Consequential or incidental damages and or costs are not refundable.
S
Important
A5
A5
10
P-2
P-16
R
89843B - 07/20/07
Advertisement
