Table of Contents
Advertisement
Function
* The On-Screen Display (OSD) in this manual may be slightly different from your projector.
* This operating guide explains operation of RGB(PC) mode mainly.
CHANNEL Menu Options
Channel Setup - Auto Scan
* Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
Run this function if you change your residence or move the projector. Also, make sure to run this function with the antenna
connected during projector broadcasting hours. Auto Tuning memorizes only the channels available at the time.
1. Press the MENU button. Then, move to CHANNEL with the
,
buttons and press the
2. Press the
,
buttons to move to Auto Turning and press the
OK button.
3. Press the
,
buttons to move to Yes and press the
• When setting the Auto Tuning or Manual Tuning, the number of maxi-
mum channels you can store is 1000. It is subject to change depending
on the broadcasting signal environment.
• Memorizes all the available channels in the order of DTV, TV, CADTV and CATV.
• Press the BACK button to exit the menu screen.
Add/Delete Channel
* When selecting DTV or CADTV input signal in the Manual Tuning menu, you can view the on-screen signal strength monitor
to see the quality of the signal being received.
1. Press the MENU button. Then, move to CHANNEL with the
,
buttons and press the
2. Press the
,
buttons to move to Manual Turning and press the
OK button.
3. Press the
,
buttons to move to DTV, TV, CADTV, or CATV and
press the
button.
4. Press the
,
buttons to move to channel you want to add or
delete.
5. Press the
buttons to move to Add or Delete and press the
• Press the BACK button to exit the menu screen.
OK button.
OK button.
,
,
CHANNEL
Auto Turning
Manual Turning
Channel Edit
OK button.
,
,
CHANNEL
Auto Turning
Manual Turning
Channel Edit
OK button.
Function
Move
OK
Move
OK
17
Advertisement
Table of Contents
