Sws Categories And Messages - Radio Shack Talking 360 Owner's Manual

Note: The closer you get to the source of the radar, the higher
the signal strength number.
When your detector senses an instant-on radar signal,
STANT - ON appears and the instant-on alert tone sounds.
For radar signal detection, if the signal strength number goes
higher than 3, the voice alert says "X-band detected," "K-band
detected," or "KA-band detected."
When your detector senses a laser signal,
the voice alert says "Laser detected."
When your detector senses an Ultralyte laser signal,
LYTE LASER scrolls and the detector says "Ultralyte laser de-
tected."
When VG-2 is detected, VG-2
"VG-2 detected."
When your detector senses a SWS signal, a message appears
depending on which SWS signal is detected, an alert tone
sounds for the type of signal detected, and the voice alert an-
nounces the message.

SWS Categories and Messages

Category 1: Highway Construction Maintenance
WORK ZONE AHEAD
ROAD CLOSED AHEAD/FOLLOW DETOUR
LASER
appears and the voice alert says
Operation
IN-
flashes and
ULTRA-
19