Table of Contents
Advertisement
• It is being used in a different location.
• The magnetic distortion flag,
played.
Follow these steps to calibrate your detector.
1. Press
for more than 2 seconds until the voice says
CITY
"Please turn your vehicle twice," and
then
TURN
and
TWICE
2. With the detector mounted in your vehicle, turn the steering
wheel all the way to the right or left and continue driving in
a circular motion. Then press
3. After
WAIT
flashes 4 times, if the calibration is complete,
SUCCESS!
appears and the voice says "Calibration com-
plete."
4. If calibration is incomplete, the display scrolls
CALIBRATE AGAIN...PRESS CITY-KEY
voice says "Please calibrate again."
After calibration, the heading appears.
Note: To achieve calibration, two circles must be made and it
must be performed on a level surface in less than 2 minutes.
16
DISTORT
is continuously dis-
CAL....
flash alternately.
.
CITY
Operation
appears;
PLEASE
and the
Advertisement
Table of Contents
