Nvr42V-8P Series - Dahua NVR21-S2 Series User Manual

2.1.10 NVR42V-8P Series

The front panel is shown as below. See Figure 2-12
Please refer to the following sheet for front panel button information.
Name
Power button
Assistant
USB2.0 port
IR receive
window
Icon Function
Power button, press this button for three seconds to boot up or
shut down NVR.

One-window monitor mode, click this button to display
assistant function: PTZ control and image color.

Backspace function: in numeral control or text control,
press it for 1.5 seconds to delete the previous character
before the cursor.

In motion detection setup, working with Fn and direction
keys to realize setup.
Fn

In text mode, click it to switch between numeral, English
character (small/capitalized) and etc.

In HDD management interface, you can click it to switch
HDD record information and other information (Menu
prompt)

Realize other special functions.
To connect USB2.0 storage device, USB2.0 mouse, burner and
etc.
It is to receive the IR signal from the remote control.
Figure 2-12
75