JVC AV-29R9B Instructions Manual page 26

 
* * * * # # # #
1
Press the
channel.
Every time you press the
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR) ap-
pears on the screen.
2
Press the yellow button to delete the TV
channel.
The TV channel is deleted from the Programme num-
bers (PR) list.


buttons to choose a TV
buttons, the Programme
" " " "     ! ! ! !
1
Press the buttons to choose a Pro-
gramme number (PR) to which you want to
register a new TV channel.
2
Press the blue button to activate the MAN-
UAL function.
At the right side following the CH/CC number, the SYS-
TEM (sound system) of the TV channel appears.
To cancel the MANUAL function:
Press the DISPLAY button.
3
Press the button to choose the SYSTEM
(sound system) for a TV channel you want
to register.
Note:
•
4
Press the green or red button to search for
a TV channel.
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
5
Press the green or red button repeatedly
until the TV channel you want appears.
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV chan-
nel.
If you cannot hear the normal sound even when
the picture of the TV channel appears normal-
ly:
The SYSTEM (sound system) setting is wrong. Press
the button and choose a SYSTEM (sound system)
that has normal sound.
6
Press the OK button and register the TV
channel to a Programme number (PR).
The normal EDIT menu is resumed.