Table of Contents
Advertisement
Steering Wheel
5
• Fit the steering wheel cap into the center of the steering
wheel. Make sure the screw holes are aligned.
• Insert two #8 x 1" (2,5 cm) screws into the steering
wheel cap and tighten.
Lock Nut
6
BOTTOM VIEW
• Position the vehicle on its side.
• Fit a
(1 cm) lock nut onto the end of the
3
/
"
8
steering column.
• While supporting the steering column tighten the lock
nut with the assembly tool.
• Turn the vehicle upright.
ASSEMBLY
Steering Wheel Cap
Activity
Panel
7
• Using safety scissors, separate the activity panel and
the instrument panel. Dispose of the plastic connector.
• Insert and "snap" the base of the shifter into the
activity panel.
8
• Fit the tabs on the bottom of the instrument panel into
the notches in the dash opening to the left side of the
steering wheel.
• Press near the top of the instrument panel to "snap"
in place.
9
Instrument Panel
DASH VIEW
W6199pr-0920
Shifter
Advertisement
Table of Contents
