Page 1 For the most up to date assembly manual, to register your set or to order replacement parts please visit www.backyarddiscovery.com Save this assembly manual for future reference in the event that you need to order replacement parts. Made in China INS-1801011-A-TIMBER COVE-ENG 12/20/17...
Page 2 With Go Configure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves. We do the heavy lifting, so you don’t have to! •...
Page 3 STOP ALTO Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.backyarddiscovery.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La ...
Page 4 Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Page 5 Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The play center is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation.
Page 6 Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9"...
Page 7 Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard.
Page 8 Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services’.
Page 9 Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment.
Page 10 Owner’s Manual Play Set 11 This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1- 800-638- 2772.
Page 11 5. How often should the playset be stained? Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer’s discretion. 6. Why does it seem that my swing set is developing cracks? Wood is a natural material;...
Page 12 Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Level 24") (Square) (Open End Wrenches 1/2" & 7/16") (Phillips Screw Driver) (Tape Measure) (Claw Hammer) (Rubber Mallet - Optional)
Page 13 Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 30'-7 3/16" 33'-4" 21'-4" 6'-0" General Information: 6'-0"...
Page 14 Parts Identification Wood Components (NOT TO SCALE) A50 - SWING BEAM - W4L08434 3 3/8"x5 1/4"x89 1/2" (86x134x2274) B01 - POST - W4L09009 3"x3"x53 7/8" (76x76x1370) B02 - POST - W4L07788 3"x3"x69 3/4" (76x76x1771) B03 - POST - W4L07789 3"x3"x59" (76x76x1500) B04 - POST - W4L07790 3"x3"x59"...
Page 15 Parts Identification Wood Components (NOT TO SCALE) B10 - POST - W4L07848 3"x3"x53 7/8" (76x76x1370) B11 - POST - W4L07856 3"x3"x47 1/4" (76x76x1201) B12 - POST - W4L07859 3"x3"x13 5/8" (76x76x345) B13 - POST - W4L08060 3"x3"x53 7/8" (76x76x1370) B14 - POST - W4L08193 3"x3"x53 7/8"...
Page 16 Parts Identification Wood Components (NOT TO SCALE) E03 - ANGLE SUPPORT - W4L08187 1 3/8"x3 3/8"x16 1/2" (36x86x420) E04 - CROWS NEST FLOOR RAIL - W4L09023 1 3/8"x3 3/8"x23" (36x86x585) E05 - CROWS NEST FLOOR SUPPORT - W4L09024 1 3/8"x3 3/8"x23" (36x86x585) E50 - SWING BEAM END SUPPORT - W4L09108 1 3/8"x3 3/8"x44 1/8"...
Page 17 Parts Identification Wood Components (NOT TO SCALE) F08 - PICNIC TABLE LEG SUPPORT - W4L08199 1 3/8"x2 3/8"x39 5/8" (36x60x1006) F09 - ANGLE SUPPORT BRACE - W4L11432 1 3/8"x2 3/8"x24 3/8" (36x60x618) F10 - ANGLE SUPPORT BRACE - W4L11433 1 3/8"x2 3/8"x24 3/8" (36x60x618) F71 - STANDARD ANGLE BRACE - W4L08992 1 3/8"x2 3/8"x13"...
Page 18 Parts Identification Wood Components (NOT TO SCALE) G08 - WALL SUPPORT - W4L07850 1"x5 1/4"x32" (24x134x813) G09 - WALL SUPPORT - W4L07853 1"x5 1/4"x36" (24x134x915) G10 - WALL SUPPORT - W4L08997 1"x5 1/4"x36" (24x134x915) G11 - WALL SUPPORT - W4L07858 1"x5 1/4"x7 1/2"...
Page 19 Parts Identification Wood Components (NOT TO SCALE) H02 - FLOOR SUPPORT - W4L07831 1"x3 3/8"x54 3/8" (24x86x1382) H03 - FLOOR SUPPORT - W4L09037 1"x3 3/8"x26 3/4" (24x86x681) H04 - FLOOR SUPPORT - W4L07834 1"x3 3/8"x29 3/4" (24x86x755) H05 - FLOOR SUPPORT - W4L07841 1"x3 3/8"x24 7/8"...
Page 20 Parts Identification Wood Components (NOT TO SCALE) H14 - ROOF SUPPORT - W4L08058 1"x3 3/8"x74 3/4" (24x86x1900) H15 - RAFTER - W4L08064 1"x3 3/8"x47 5/8" (24x86x1209) H16 - RAFTER - W4L08065 1"x3 3/8"x47 5/8" (24x86x1209) H17 - WALL SUPPORT - W4L08152 1"x3 3/8"x35"...
Page 21 Parts Identification Wood Components (NOT TO SCALE) H26 - PICKET - W4L08287 1"x3 3/8"x24 3/8" (24x86x620) H27 - ROCKWALL RAIL - W4L08289 1"x3 3/8"x61 3/4" (24x86x1570) H29 - FLOOR SUPPORT - W4L07842 1"x2 3/4"x21 7/8" (24x70x555) H30 - BASE BOARD - W4L08566 1"x3 3/8"x35"...
Page 22 Parts Identification Wood Components (NOT TO SCALE) J04 - WALL SUPPORT - W4L08190 1"x2 3/8"x11 5/8" (24x60x295) J05 - CROWS NEST WALL SUPPORT - W4L09027 1"x2 3/8"x37 1/2" (24x60x952) K01 - ENTRY RAIL - W4L09013 5/8"x5 1/4"x39 5/8" (16x134x1008) K02 - ENTRY RAIL - W4L09018 5/8"x5 1/4"x36 5/8"...
Page 23 Parts Identification Wood Components (NOT TO SCALE) K10 - FLOOR BOARD - W4L07837 5/8"x5"x65 5/8" (16x128x1668) K11 - WALL PICKET - W4L08262 5/8"x5 1/4"x43 1/4" (16x132x1099) K12 - BASE BOARD - W4L08263 5/8"x5 1/4"x39" (16x134x992) K13 - BASE BOARD - W4L09010 5/8"x5 1/4"x37 7/8"...
Page 24 Parts Identification Wood Components (NOT TO SCALE) L5 - FLOOR BOARD - W4L08036 5/8"x4 3/8"x31 7/8" (16x112x811) L6 - FLOOR BOARD - W4L08037 5/8"x4 3/8"x27" (16x112x687) L07 - CROWS NEST FLOOR BOARD - W4L09025 5/8"x4 3/8"x31 1/4" (16x112x794) L8 - WALL PICKET - W4L08046 5/8"x4 3/8"x9 5/8"...
Page 25 Parts Identification Wood Components (NOT TO SCALE) M10 - WALL PICKET - W4L08052 (10) 5/8"x3 3/8"x9 5/8" (16x86x243) M11 - WALL PICKET - W4L08053 5/8"x3 3/8"x9 5/8" (16x86x243) M12 - WALL PICKET - W4L08054 5/8"x3 3/8"x39 7/8" (16x86x1013) M13 - WALL BOARD - W4L08063 5/8"x3 3/8"x69 1/2"...
Page 26 Parts Identification Wood Components (NOT TO SCALE) M22 - WALL PICKET - W4L08157 5/8"x3 3/8"x27 1/4" (16x86x692) M23 - WALL PICKET - W4L08167 (13) 5/8"x3 3/8"x29 7/8" (16x86x759) M24 - WALL PICKET - W4L08188 5/8"x3 3/8"x7 7/8" (16x86x199) M25 - FLOOR BOARD - W4L08281 5/8"x3 3/8"x39"...
Page 27 Parts Identification Wood Components (NOT TO SCALE) M80 - ROCK WALL BOARD - W4L08423 (10) 5/8"x3 3/8"x22" (16x86x560) M81 - ROCK WALL BOARD - W4L08422 5/8"x3 3/8"x22" (16x86x560) M82 - ROCK WALL BOARD - W4L08444 5/8"x3 3/8"x22" (16x86x560) M102 - ATTACHMENT BOARD - W4L06934 5/8"x3 3/8"x18 1/4"...
Page 28 Parts Identification Wood Components (NOT TO SCALE) N08 - WALL PICKET - W4L08166 5/8"x2 3/8"x29 7/8" (16x60x759) O01 - WALL PICKET - W4L08043 (60) 5/8"x1 3/8"x32 7/8" (16x34x835) O02 - WALL PICKET - W4L08047 5/8"x3"x9 5/8" (16x75x244) O03 - WALL PICKET - W4L08049 5/8"x1 3/8"x39 7/8"...
Page 29 Parts Identification Wood Components (NOT TO SCALE) Y04 - FLOOR BOARD - W4L07836 5/8"x4"x88 1/2" (16x102x2248) TP1 - PICNIC TABLE TOP - W2A02221 (2) TP2 - PICNIC TABLE SEAT - W2A02222 1 9/16"x17"x40 11/16" (40x430x1034) 1 9/16"x6 3/4"x40 11/16" (40x172x1034) FP01 - FLOOR PANEL - W2A02110 1 1/4"x20 9/16"x88 9/16"...
Page 30 Parts Identification Wood Components (NOT TO SCALE) RP02 - ROOF PANEL - W2A02184 1 9/16"x19 1/4"x85 3/16" (40x488x2166) RP03 - ROOF PANEL - W2A02185 1 9/16"x18 3/4"x85 3/16" (40x476x2166) RP04 - ROOF PANEL - W2A02186 1 9/16"x18 3/4"x85 3/16" (40x476x2166) (1) FP03 - FLOOR PANEL - W2A02183 1 1/4"x20 11/16"x22 13/16"...
Page 31 Parts Identification Hardware (13) (22) - BOLT WH 5/16x2 BLK - H100457 - BOLT WH 5/16x1/2 BLK - H100396 (32) - BOLT WH 5/16x2-1/4 BLK - H100205 (21) - BOLT WH 5/16x1/2 - H100115 (28) - BOLT WH 5/16x3/4 BLK - H100663 - BOLT WH 5/16x2-3/4 BLK - H100195 (18) - BOLT WH 5/16x1 BLK - H100468...
Page 32 Parts Identification Hardware (54) - BOLT WH 5/16x3 3/4 BLK - H100415 - NUT LOCK 1/4 BLK - H100653 - BOLT WH 5/16x4 BLK - H100512 - NUT LOCK 5/16 BLK - H100479 - BOLT WH 5/16x4 1/4 BLK - H100513 - BOLT WH 5/16x4 1/2 BLK - H100534 - EYE BOLT, LAG THREAD, 7/32 WIRE, 2-1/8"...
Page 33 Parts Identification Hardware - LAG SCREW WH 1/4x2 BLK - H100487 (26) - T-NUT 1/4 - H100072 - LAG SCREW WH 1/4x2-1/2 BLK - H100456 (33) - T-NUT 1/4 BLK - H100398 (38) - LAG SCREW WH 5/16x1 1/2 BLK - H100471 (13) - T-NUT 3/8 - H100073 (10)
Page 34 Parts Identification Hardware (46) - SCREW PWH 8x7/16 - H100361 - SCREW PWH 8x1/2 BLK - H100408 - SCREW PWH 8x5/8 BLK - H100202 - WASHER FLAT 8x27 BLK - H100478 - SCREW PWH 8x5/8 - H100128 (68) - SCREW PWH 8x3/4 BLK - H100392 (13) - WASHER FLAT 11x25 - H100102 (150)
Page 35 Parts Identification Accessories (NOT TO SCALE) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 EL - SLIDE RAIL 8' GREEN LEFT - A100055 UW - SLIDE BED 8' LIGHT GREEN - A100356...
Page 36 Parts Identification Accessories (NOT TO SCALE) DP - SWING SEAT GREEN - A100027 (18) FA - QUICK LINK - A100069 - SWING HANGER - A4M00505 RIGHT SIDE - BRACKET SWING BEAM 45° CC 62 GREEN - A4M00847 LEFT SIDE - BRACKET SWING BEAM 45° CC 86 GREEN - A4M00848 KN - CHAIN GREEN 31"...
Page 37 Parts Identification Accessories (NOT TO SCALE) EJ - L BRACKET 54x67 - GRN - A100053 - 90° L-BRACKET - BLK - A4M00555 HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164 - L BRACKET 2.5x38x50x55 BLK - A4M00615 - TRIANGLE BRACE 100x200x12ga - BLK - A4M00827 TZ - L BRACKET 2.5x38x50x55 - A100340 WM - L BRACKET 51x32x82x3.175 - A100396...
Page 38 Parts Identification Accessories (NOT TO SCALE) - ROUND ROOF RIB CONNECTOR PLATE - A4M00844 - ROUND ROOF PLASTIC CAP - A6P00239 FX - HAND GRIP METAL GREEN 381 c/c - A100118 (10) - GROUND STAKE REBAR - A4M00527 (12) - CLATTER BRIDGE ROPE - A6P00245 SQ - "A"...
Page 39 Parts Identification Accessories (NOT TO SCALE) (2) -TURRET WALL ARCH BAND - A4M00880 (1) -TURRET WALL ARCH BAND - A4M00907 (2) -QUARTER ROUND TURRET FLOOR SUPPORT - A4M00881 (1) -QUARTER ROUND TURRET FLOOR SUPPORT - A4M00883 (1) -TURRET WALL ARCH BAND - A4M00896 (2) -QUARTER ROUND TURRET FLOOR SUPPORT - A4M00897...
Page 40 M77 - SLIDE BRACE - W4L08748 5/8"x3 3/8"x17 1/4" (16x86x438) UW - SLIDE BED 8' LIGHT GREEN - A100356 SLIDE ASSEMBLY STEP 1 ● PLACE SLIDE BRACE CENTERED ON THE BOTTOM 1/4" FROM THE EDGE. TRANSFER HOLES ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 3/8" DRILL BIT. ●...
Page 41 EK - SLIDE RAIL 8' GREEN RIGHT - A100054 EL - SLIDE RAIL 8' GREEN LEFT - A100055 M78 - CENTER SLIDE BRACE - W4L08749 5/8"x3 3/8"x17 1/4" (16x86x438) SLIDE ASSEMBLY STEP 2 TIP: ● PLACE 1 SLIDE RAIL ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE DRILL 1/8"...
Page 42 A50 - SWING BEAM - W4L08434 3 3/8"x5 1/4"x89 1/2" (86x134x2274) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 - BRACKET SWING BEAM 45° CC 62 GREEN - A4M00847 TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 - BRACKET SWING BEAM 45° CC 86 GREEN - A4M00848 HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164 SWINGBEAM ASSEMBLY STEP 1...
Page 43 - SWING HANGER - A4M00505 SWINGBEAM ASSEMBLY STEP 2 BOLT HEX (12) 3/8x5-1/2 WASHER (12) LOCK INT (12) T-NUT 3/8 10x18 WASHER (12) FLAT 11x25 T-NUT 3/8 (12 PLCS) SWING HANGER (6 PLCS) WASHER FLAT 11x25 (12 PLCS) WASHER LOCK INT 10x18 (12 PLCS) BOLT HEX 3/8x5-1/2 (12 PLCS)
Page 44 SP50 - SWING BEAM SUPPORT - W4L06617 3 3/8"x3 3/8"x49 3/8" (86x86x1254) SWINGBEAM ASSEMBLY STEP 3 BOLT WH 5/16x3 BLK NUT BARREL WH 5/16x7/8 BOLT WH 5/16x3 BLK (2 PLCS) NUT BARREL WH 5/16x7/8 BLK (2 PLCS) NOTE HOLE LOCATION FOR PROPER ASSEMBLY SP50...
Page 45 E51 - ANGLE BRACE - W4L06614 1 3/8"x3 3/8"x88 3/4" (36x86x2254) E50 - END SUPPORT - W4L06615 1 3/8"x3 3/8"x44 1/8" (36x86x1120) SWINGBEAM ASSEMBLY STEP 4 BOLT WH 5/16X6 BLK WASHER LOCK EXT 12x19 BLK BOLT WH 5/16x3 3/4 WASHER LOCK EXT 8x19 BLK NUT BARREL...
Page 46 G50 - GROUND BOARD - W4L06613 1"x5 1/4"x86 3/4" (24x134x2202) SWINGBEAM ASSEMBLY STEP 5 BOLT WH WASHER 5/16x2 BLK LOCK EXT 12x19 BLK WASHER NUT BARREL LOCK EXT WH 5/16x7/8 8x19 BLK NUT BARREL WH 5/16x7/8 BLK (4 PLCS) WASHER LOCK EXT 12x19 BLK (4 PLCS) WASHER LOCK EXT 8x19 BLK (4 PLCS)
Page 47 H27 - ROCKWALL RAIL - W4L08289 Y03 - ROCK WALL END BOARD - W4L08421 1"x3 3/8"x61 3/4" (24x86x1570) 5/8"x4"x22" (16x102x560) M80 - ROCK WALL BOARD - W4L08423 M81 - ROCK WALL BOARD - W4L08422 M82 - ROCK WALL BOARD - W4L08444 (10) 5/8"x3 3/8"x22"...
Page 48 M27 - ATTACHMENT BOARD - W4L08288 5/8"x3 3/8"x22" (16x86x560) ROCK WALL ASSEMBLY STEP 2 SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/4 (4 PLCS) NOTE HOLE LOCATION LOWER THAN CENTER...
Page 49 ROCK WALL ASSEMBLY STEP 3 (24) T-NUT 1/4 T-NUT 1/4 (24 PLCS)
Page 50 (12) - GREEN HC ROCK #2 - A6P00037 ROCK WALL ASSEMBLY STEP 4 BOLT PTH (24) 1/4x3/4 WASHER (24) LOCK INT 8x15 BOLT PTH 1/4x3/4 (24 PLCS) GREEN HC ROCK #2 (12 PLCS) WASHER LOCK INT 8x15 (24 PLCS) ARROW POINTS TO THE TOP.
Page 51 H74 - LEFT UPRIGHT - W4L06930 1"x3 3/8"x50 3/4" (24x86x1290) H81 - LADDER RUNG - W4L06933 1"x3 3/8"x17 1/8" (24x86x434) H75 - RIGHT UPRIGHT - W4L06931 1"x3 3/8"x50 3/4" (24x86x1290) LADDER ASSEMBLY STEP 1 SCREW PFH SCREW PFH 8x2 (8 PLCS) LADDER ASSEMBLY STEP 2 SCREW PFH...
Page 52 M102 - ATTACHMENT BOARD - W4L06934 M103 - REAR SUPPORT - W4L06932 5/8"x3 3/8"x18 1/4" (16x86x462) 5/8"x3 3/8"x18 1/4" (16x86x462) LADDER ASSEMBLY STEP 3 SCREW PFH 8x1 1/2 M103 SCREW PFH 8x1 1/2 (4 PLCS) LADDER ASSEMBLY STEP 4 SCREW PFH 8x1 1/2 M102 FLUSH TO TOP.
Page 53 B02 - POST - W4L07788 G02 - WALL SUPPORT - W4L07823 3"x3"x69 3/4" (76x76x1771) 1"x5 1/4"x66 5/8" (24x134x1692) B04 - POST - W4L07790 K09 - BASE BOARD - W4L07799 3"x3"x59" (76x76x1500) 5/8"x5 1/4"x66" (16x134x1677) STEP 1 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF T-NUT 5/16 PARTS.
Page 54 B19 - POST W/ LABEL - W2A02256 G03 - WALL SUPPORT - W4L07824 3"x3"x59" (76x76x1500) 1"x5 1/4"x89 1/2" (24x134x2273) B03 - POST - W4L07789 3"x3"x59" (76x76x1500) K09 - BASE BOARD - W4L07799 5/8"x5 1/4"x66" (16x134x1677) F71 - STANDARD ANGLE BRACE - W4L08992 1 3/8"x2 3/8"x13"...
Page 55 G04 - CROSS BRACE - W4L07826 1"x5 1/4"x82" (24.0 mmx134x2081) STEP 3 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF BOLT WH PARTS. 5/16x1 BLK BOLT WH 5/16x1 3/4 T-NUT 5/16 (10) BOLT WH 5/16x1 1/2 WASHER (10) LOCK EXT...
Page 56 G04 - CROSS BRACE - W4L07826 1"x5 1/4"x82" (24x134x2081) STEP 4 IT IS RECOMMENDED THAT YOU PLACE ALL BOLT WH T-NUTS BEFORE YOU BEGIN ASSEMBLY OF 5/16x1 3/4 PARTS. WASHER (10) LOCK EXT 8x19 BLK BOLT WH 5/16x1 1/2 T-NUT 5/16 (10) BOLT WH 5/16x1 BLK...
Page 57 - TRIANGLE BRACE 100x200x12ga - BLK - A4M00827 STEP 5 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. BOLT WH 5/16x1/2 BLK T-NUT 5/16 BLK T-NUT 5/16 (4 PLCS) NUT BARREL WH 5/16x7/8 BLK (4 PLCS) WASHER LOCK EXT 12x19 BLK (4 PLCS)
Page 58 - TRIANGLE BRACE 100x200x12ga - BLK - A4M00827 STEP 6 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. BOLT WH 5/16x1/2 BLK NUT BARREL WH 5/16x7/8 BLK T-NUT 5/16 (4 PLCS) T-NUT 5/16 BLK (4 PLCS) WASHER LOCK EXT 12x19 BLK (4 PLCS)
Page 59 G01 - WALL SUPPORT - W4L07822 F71 - STANDARD ANGLE BRACE - W4L08992 1"x5 1/4"x54 1/2" (24x134x1384) 1 3/8"x2 3/8"x13" (36x60x330) T01 - FLOOR SUPPORT - W4L07829 K08 - BASE BOARD - W4L07797 1"x1 3/8"x48 3/8" (24x34x1230) 5/8"x5 1/4"x54 1/2" (16x134x1384) STEP 7 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF...
Page 60 H01 - FLOOR SUPPORT - W4L07825 1"x3 3/8"x54 1/2" (24x86x1384) F71 - STANDARD ANGLE BRACE - W4L08992 - L BRACKET 2.5x38x50x55 BLK - A4M00615 1 3/8"x2 3/8"x13" (36x60x330) B05 - POST - W4L07791 K07 - BASE BOARD - W4L07798 3"x3"x59" (76x76x1500) 5/8"x5 1/4"x54 1/2"...
Page 61 H02 - FLOOR SUPPORT - W4L07831 1"x3 3/8"x54 3/8" (24x86x1382) STEP 9 SCREW PFH 8x2 1/2 SCREW PFH 8x2 1/2 (8 PLCS) BOARDS FLUSH ON BOTTOM SURFACES.
Page 62 K10 - FLOOR BOARD - W4L07837 5/8"x5"x65 5/8" (16x128x1668) FP02 - FLOOR PANEL - W2A02181 1 1/4"x20 9/16"x66" (32x523x1662) STEP 10 SCREW PFH SCREW PFH 8x1 1/2 (31) 8x1 1/2 (31 PLCS) FP02...
Page 63 B06 - POST - W4L07838 G05 - WALL SUPPORT - W4L07827 3"x3"x58" (76x76x1472) 1"x5 1/4"x26 3/4" (24x134x681) B07 - POST - W4L07839 G06 - WALL SUPPORT - W4L07828 1"x5 1/4"x30 5/8" (24x134x778) 3"x3"x69 1/8" (76x76x1757) STEP 11 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS.
Page 64 T02 - FLOOR SUPPORT - W4L07830 1"x1 3/8"x22 5/8" (24x34x576) H22 - FLOOR SUPPORT - W4L08279 1"x2 3/4"x3" (24x70x76) STEP 12 SCREW PFH SCREW PFH 8x2 (8 PLCS)
Page 65 Y04 - FLOOR BOARD - W4L07836 5/8"x4"x88 1/2" (16x102x2248) (1) FP01 - FLOOR PANEL - W2A02110 1 1/4"x20 9/16"x88 9/16" (32x523x2243) STEP 13 SCREW PFH 8x1 1/2 FP01 (50 PLCS) SCREW PFH (50) 8x1 1/2 FRONT FRONT...
Page 66 B08 - POST - W4L07840 H04 - FLOOR SUPPORT - W4L07834 H22 - FLOOR SUPPORT - W4L08279 3"x3"x29 5/8" (76x76x754) 1"x3 3/8"x29 3/4" (24x86x755) 1"x2 3/4"x3" (24x70x76) J02 - FLOOR SUPPORT - W4L07843 1"x2 3/8"x24 3/4" (24x60x630) H03 - FLOOR SUPPORT - W4L09037 H29 - FLOOR SUPPORT - W4L07842 H05 - FLOOR SUPPORT - W4L07841 1"x3 3/8"x26 3/4"...
Page 67 SUBASSEMBLY FROM STEP 14 STEP 15 LAG SCREW WH 5/16x2 BOLT WH 5/16x3 3/4 WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x3 3/4 BLK (1 PLC) LAG SCREW WH 5/16x2 BLK (1 PLC) BOLT WH 5/16x3 3/4 BLK (1 PLC) WASHER LOCK EXT 8x19 BLK (4 PLC) BOLT WH 5/16x3 3/4 BLK...
Page 68 F71 - STANDARD ANGLE BRACE - W4L08992 1 3/8"x2 3/8"x13" (36x60x330) STEP 16 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. BOLT WH 5/16x2-1/4 LAG SCREW WH 5/16x2-1/2 T-NUT 5/16 WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK (1 PLCS) WASHER LOCK EXT 8x19 BLK...
Page 69 Y01 - FLOOR BOARD - W4L07845 5/8"x4"x22 7/8" (16x102x580) (1) FP03 - FLOOR PANEL - W2A02183 1 1/4"x20 11/16"x22 13/16" (32x525x580) STEP 17 SCREW PFH (16) 8x1 1/2 FP03 SCREW PFH 8x1 1/2 (16 PLCS)
Page 70 M04 - GUARD RAIL - W4L08995 M02 - BASE BOARD - W4L09015 5/8"x3 3/8"x26 3/4" (16x86x681) 5/8"x3 3/8"x25 1/8" (16x86x639) - L BRACKET 2.5x38x50x55 BLK - A4M00615 STEP 18 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. L BRACKET 2.5x38x50x55 BLK (1 PLCS) BOLT WH 5/16x1/2 BLK...
Page 71 F04 - PICNIC TABLE OUTER SUPPORT - W4L08194 1 3/8"x2 3/8"x16 3/4" (36x60x424) F07 - PICNIC TABLE LEG SUPPORT - W4L08198 1 3/8"x2 3/8"x39 5/8" (36x60x1006) STEP 19 LAG SCREW WH 5/16x3 WASHER LOCK EXT 8x19 BLK WASHER LOCK EXT 8x19 BLK (2 PLCS) LAG SCREW WH 5/16x3 BLK (2 PLCS)
Page 72 J01 - PICNIC TABLE POST SUPPORT - W4L09039 1"x2 3/8"x16 1/2" (24x60x418) STEP 20 WASHER LOCK EXT 12x19 BLK BOLT WH 5/16x2 BLK NUT BARREL WH 5/16x7/8 WASHER LOCK EXT WASHER 6x15 BLK LOCK EXT 8x19 BLK BOLT WH 5/16x2 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS)
Page 73 F05 - PICNIC TABLE OUTER SUPPORT - W4L08195 F08 - PICNIC TABLE LEG SUPPORT - W4L08199 1 3/8"x2 3/8"x16 3/4" (36x60x424) 1 3/8"x2 3/8"x39 5/8" (36x60x1006) F06 - PICNIC TABLE LEG - W4L08196 1 3/8"x2 3/8"x29 7/8" (36x60x757) STEP 21 WASHER LOCK EXT 12x19 BLK...
Page 74 H09 - BASE BOARD - W4L08042 1"x3 3/8"x12 1/8" (24x86x308) (1) SUBASSEMBLY FROM STEP 21 (1) TP1 - PICNIC TABLE TOP - W2A02221 1 9/16"x17"x40 11/16" (40x430x1034) STEP 22 SCREW PFH (20) 8x1 1/2 SCREW PFH SCREW PFH 8x1 1/2 (20 PLCS) SCREW PFH 8x2 (8 PLCS)
Page 75 TP2 - PICNIC TABLE SEAT - W2A02222 1 9/16"x6 3/4"x40 11/16" (40x172x1034) STEP 23 SCREW PFH (16) 8x1 3/4 SCREW PFH 8x1 3/4 (16 PLCS)
Page 76 B01 - POST - W4L09009 B13 - POST - W4L08060 3"x3"x53 7/8" (76x76x1370) 3"x3"x53 7/8" (76x76x1370) E01 - POST - W4L09002 3 3/8"x1 3/8"x53 7/8" (36x86x1370) STEP 24 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. WASHER LOCK EXT 8x19 BLK...
Page 77 K14 - ENTRY BOARD - W4L09003 K16 - WALL SUPPORT - W4L09005 5/8"x5 1/4"x32 3/4" (16x134x832) 5/8"x5 1/4"x30" (16x134x762) K15 - WALL SUPPORT - W4L09004 5/8"x5 1/4"x27" (16x134x686) STEP 25 WASHER LOCK EXT 8x19 BLK (12 PLCS) WASHER (12) BOLT WH 5/16x3 1/2 BLK LOCK EXT 8x19 BLK (10 PLCS)
Page 78 E02 - POST - W4L09017 3 3/8"x1 3/8"x53 7/8" (36x86x1370) B10 - POST - W4L07848 3"x3"x53 7/8" (76x76x1370) STEP 26 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. WASHER LOCK EXT 8x19 BLK (5 PLCS) BOLT WH 5/16x2-1/4 BLK (2 PLCS) WASHER...
Page 79 B09 - POST - W4L07847 3"x3"x53 7/8" (76x76x1370) B14 - POST - W4L08193 3"x3"x53 7/8" (76x76x1370) STEP 27 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE T-NUT 5/16 (12) YOU BEGIN ASSEMBLY OF PARTS. WASHER LOCK EXT 8x19 BLK (3 PLCS) WASHER LOCK EXT...
Page 80 G13 - WALL SUPPORT - W4L07862 K05 - WALL SUPPORT - W4L08998 1"x5 1/4"x29 1/4" (24x134x744) 5/8"x5 1/4"x28 7/8" (16x134x733) G14 - WALL SUPPORT - W4L07863 K06 - WALL SUPPORT - W4L08999 1"x5 1/4"x27 3/4" (24x134x706) 5/8"x5 1/4"x28 1/4" (16x134x716) STEP 28 WASHER FLAT 8x27...
Page 81 N08 - WALL PICKET - W4L08166 M23 - WALL PICKET - W4L08167 5/8"x2 3/8"x29 7/8" (16x60x759) 5/8"x3 3/8"x29 7/8" (16x86x759) STEP 29 SCREW PFH 8x1-1/2" SCREW PFH 8x1-1/8" SCREW PFH 8x1-1/8" (7 PLCS) SCREW PFH 8x1-1/2" (7 PLCS) 4 FT DECK...
Page 82 N08 - WALL PICKET - W4L08166 M23 - WALL PICKET - W4L08167 5/8"x2 3/8"x29 7/8" (16x60x759) 5/8"x3 3/8"x29 7/8" (16x86x759) M26 - WALL PICKET - W4L08286 5/8"x3 3/8"x29 7/8" (16x86x759) STEP 30 SCREW PFH 8x1-1/2" SCREW PFH 8x1-1/8" LONG END UP SCREW PFH 8x1-1/8"...
Page 83 H06 - FLOOR SUPPORT - W4L07851 1"x3 3/8"x32" (24x86x813) STEP 31 WASHER LOCK EXT 8x19 BLK LAG SCREW WH 5/16x2-1/2 LAG SCREW WH 5/16x2-1/2 BLK (1 PLC) WASHER LOCK EXT 8x19 BLK (1 PLC) FRONT LEFT CORNER...
Page 84 H30 - BASE BOARD - W4L08566 1"x3 3/8"x35" (24x86x889) - L BRACKET 2.5x38x50x55 BLK - A4M00615 STEP 32 BOLT WH WASHER 5/16x1/2 BLK LOCK EXT USE BRACKET AS TEMPLATE 12x19 BLK DRILL 3/8" HOLE IN FLOOR WASHER LOCK EXT 12x19 BLK T-NUT 5/16 (2 PLCS) NUT BARREL...
Page 85 G09 - WALL SUPPORT - W4L07853 G07 - WALL SUPPORT - W4L07849 1"x5 1/4"x36" (24x134x915) 1"x5 1/4"x36" (24x134x915) STEP 33 WASHER LOCK EXT 8x19 BLK SCREW PFH LAG SCREW 8x2 1/2 WH 5/16x2-1/2 LAG SCREW WH 5/16x2-1/2 BLK (4 PLCS) WASHER LOCK EXT 8x19 BLK (4 PLCS) SCREW PFH 8x2 1/2...
Page 86 B11 - POST - W4L07856 3"x3"x47 1/4" (76x76x1201) G08 - WALL SUPPORT - W4L07850 EDGE HOLES 1"x5 1/4"x32" (24x134x813) B12 - POST - W4L07859 FACE DOWN. 3"x3"x13 5/8" (76x76x345) STEP 34 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS.
Page 87 H07 - FLOOR SUPPORT - W4L07854 1"x3 3/8"x32" (24x86x813) H22 - FLOOR SUPPORT - W4L08279 1"x2 3/4"x3" (24x70x76) H08 - FLOOR SUPPORT - W4L07855 1"x3 3/8"x26" (24x86x661) STEP 35 SCREW PFH ASSEMBLE H07 & H08 FLUSH WITH BOTTOM 8x2 1/2 ASSEMBLE H22 5/8"...
Page 88 F10 - ANGLE SUPPORT BRACE - W4L11433 F09 - ANGLE SUPPORT BRACE - W4L11432 K04 - CROSS BRACE - W4L08996 1 3/8"x2 3/8"x24 3/8" (36x60x618) 1 3/8"x2 3/8"x24 3/8" (36x60x618) 5/8"x5 1/4"x17 3/4" (16x134x450) STEP 36 BOLT WH 5/16x1 1/4 LAG SCREW LAG SCREW WH 5/16x2...
Page 89 THIS HOLE TO OUTSIDE Y02 - FLOOR BOARD - W4L07860 M03 - FLOOR BOARD - W4L07861 5/8"x4"x34 1/4" (16x102x869) 5/8"x3 3/8"x34 1/4" (16x86x869) STEP 37 SCREW PFH (31) 8x1 1/2 SCREW PFH 8x1 1/2 (31 PLCS)
Page 90 G10 - WALL SUPPORT - W4L08997 G11 - WALL SUPPORT - W4L07858 G12 - WALL SUPPORT - W4L07864 1"x5 1/4"x36" (24x134x915) 1"x5 1/4"x7 1/2" (24x134x192) 1"x5 1/4"x10 5/8" (24x134x269) H17 - WALL SUPPORT - W4L08152 1"x3 3/8"x35" (24x86x889) STEP 38 SCREW PFH 8x2 (4 PLCS) SCREW PFH...
Page 91 F01 - POST - W4L07867 1 3/8"x2 3/8"x54 5/8" (36x60x1389) M32 - TURRET FILLER BOARD - W4L11431 5/8"x3 3/8"x5 3/4" (16x86x146) - QUARTER ROUND TURRET FLOOR SUPPORT - A4M00881 J03 - WALL SUPPORT - W4L07868 1"x2 3/8"x27 1/8" (24x60x688) - 90° L-BRACKET - BLK - A4M00555 - TURRET WALL ARCH BAND - A4M00880 STEP 39 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS...
Page 92 M21 - WALL BOARD - W4L08156 M19 - WALL PICKET - W4L08153 5/8"x3 3/8"x20 1/2" (16x86x521) 5/8"x3 3/8"x43 1/4" (16x86x1099) M22 - WALL PICKET - W4L08157 O04 - WALL PICKET - W4L08154 5/8"x3 3/8"x27 1/4" (16x86x692) 5/8"x2 3/8"x43 1/4" (16x60x1099) STEP 40 SCREW PFH (22)
Page 93 N03 - WINDOW BOTTOM - W4L08158 N04 - WINDOW SIDE - W4L08159 STEP 41 SCREW PFH (14) SCREW PFH 8x1 (14 PLCS)
Page 94 SUBASSEMBLY FROM STEP 39 STEP 42 SCREW PWH 8x1/2 BLK BOLT WH 1/4x1 BLK BOLT WH 1/4x1 BLK (2 PLCS) SCREW PWH 8x1/2 BLK (2 PLCS)
Page 95 F02 - POST - W4L08040 F03 - POST - W4L08041 1 3/8"x2 3/8"x47 1/4" (36x60x1199.8) 1 3/8"x2 3/8"x47 1/4" (36x60x1199.8) STEP 43 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. T-NUT 1/4 BOLT WH 1/4x2-1/4 BLK T-NUT 1/4 BLK (3 PLCS)
Page 96 N05 - FLOOR SUPPORT - W4L09000 M10 - WALL PICKET - W4L08052 5/8"x2 3/8"x23 3/8" (16x60x594) 5/8"x3 3/8"x9 5/8" (16x86x243) N06 - FLOOR SUPPORT - W4L09001 5/8"x2 3/8"x24" (16x60x611) M11 - WALL PICKET - W4L08053 5/8"x3 3/8"x9 5/8" (16x86x243) STEP 44 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS.
Page 97 M10 - WALL PICKET - W4L08052 L02 - WALL PICKET - W4L08051 5/8"x3 3/8"x9 5/8" (16x86x243) 5/8"x4 3/8"x9 5/8" (16x112x243) STEP 45 SCREW PFH (10) 8x1-1/2" SCREW PFH (10) 8x1-1/8" SCREW PFH 8x1-1/8" (10 PLCS) TOP ROW SCREW PFH 8x1-1/2" (10 PLCS)
Page 98 L08 - WALL PICKET - W4L08046 O02 - WALL PICKET - W4L08047 5/8"x4 3/8"x9 5/8" (16x112x244) 5/8"x3"x9 5/8" (16x75x244) STEP 46 SCREW PFH (12) 8x1 1/2 SCREW PFH 8x1 1/2 (12 PLCS)
Page 99 L1 - FLOOR BOARD - W4L07869 L5 - FLOOR BOARD - W4L08036 5/8"x4 3/8"x34" (16x112x865) 5/8"x4 3/8"x31 7/8" (16x112x811) M7 - FLOOR BOARD - W4L08038 5/8"x2 1/2"x19 3/8" (16x62x493) L4 - FLOOR BOARD - W4L08035 L6 - FLOOR BOARD - W4L08037 5/8"x4 3/8"x33 1/2"...
Page 100 - TURRET WALL ARCH BAND - A4M00880 - QUARTER ROUND TURRET FLOOR SUPPORT - A4M00881 STEP 48 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. BOLT WH 1/4x1 BLK BOLT WH 1/4x2-1/4 BLK T-NUT 1/4 QUARTER ROUND TURRET FLOOR SUPPORT (1 PLC) BOLT WH 1/4x2-1/4 BLK...
Page 101 - TURRET WALL ARCH BAND - A4M00907 - QUARTER ROUND TURRET FLOOR SUPPORT - A4M00883 STEP 49 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. T-NUT 1/4 BOLT WH 1/4x2-1/4 BLK TURRET WALL ARCH BAND (1 PLC) BOLT WH 1/4x2-1/4 BLK (5 PLCS)
Page 102 O1 - WALL PICKET - W4L08043 (60) 5/8"x1 3/8"x32 7/8" (16x34x835) STEP 50 X 60 SCREW PWH 10x1-1/4 (120 PLCS) SCREW PWH (120) 10x1-1/4...
Page 103 H10 - ROOF SUPPORT - W4L08050 1"x3 3/8"x76 3/4" (24x86x1949) STEP 51 WASHER LOCK EXT 8x19 BLK (2 PLCS) BOLT WH 5/16x3 3/4 BLK LAG SCREW WH 5/16x2 (2 PLCS) WASHER BOLT WH LOCK EXT 5/16x3 3/4 8x19 BLK VIEW A-A FLUSH WASHER LOCK EXT 8x19 BLK (1 PLC)
Page 104 G15 - WALL SUPPORT - W4L08261 K11 - WALL PICKET - W4L08262 1"x5 1/4"x8 5/8" (24x134x218) 5/8"x5 1/4"x43 1/4" (16x132x1099) STEP 52 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. WASHER LOCK EXT 8x19 BLK SCREW PFH 8x1 1/2 BOLT WH (2 PLCS)
Page 105 MARK DRILL LOCATION USING THE J04 PART J04 - WALL SUPPORT - W4L08190 1"x2 3/8"x11 5/8" (24x60x295) AS A TEMPLATE. STEP 53 WASHER LOCK EXT 8x15 BLK (1 PLC) NUT BARREL WH 1/4x5/8 BLK (1 PLC) BOLT WH LAG SCREW 1/4x1-1/4 BLK DRILL THROUGH WH 5/16x1 1/2...
Page 106 M09 - WALL PICKET - W4L08048 5/8"x3 3/8"x39 7/8" (16x86x1013) O03 - WALL PICKET - W4L08049 5/8"x1 3/8"x39 7/8" (16x34x1013) M12 - WALL PICKET - W4L08054 5/8"x3 3/8"x39 7/8" (16x86x1013) STEP 54 SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (8 PLCS)
Page 107 - QUARTER ROUND TURRET FLOOR SUPPORT - A4M00897 - TURRET WALL ARCH BAND - A4M00896 STEP 55 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. T-NUT 1/4 BOLT WH 1/4x2-1/4 BLK QUARTER ROUND TURRET FLOOR SUPPORT (2 PLC) BOLT WH 1/4x2-1/4 BLK (7 PLCS)
Page 108 N08 - WALL PICKET - W4L08166 M23 - WALL PICKET - W4L08167 5/8"x2 3/8"x29 7/8" (16x60x759) 5/8"x3 3/8"x29 7/8" (16x86x759) STEP 56 SCREW PFH (16) 8x1 1/2 SCREW PFH 8x1 1/2 (16 PLCS)
Page 109 H13 - ROOF SUPPORT - W4L09016 1"x3 3/8"x74 3/4" (24x86x1900) STEP 57 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. LAG SCREW WH 5/16x2 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS) LAG SCREW BOLT WH WH 5/16x2...
Page 110 M20 - WALL PICKET - W4L08155 5/8"x3 3/8"x53 7/8" (16x86x1370) N07 - WALL PICKET - W4L08164 5/8"x2 3/8"x53 7/8" (16x60x1370) STEP 58 SCREW PFH (20) 8x1-1/2" SCREW PFH 8x1-1/8" SCREW PFH 8x1-1/2" (20 PLCS) SCREW PFH 8x1-1/8" (1 PLC)
Page 111 H31 - WALL BOARD - W4L09019 E04 - CROWS NEST FLOOR RAIL - W4L09023 1 3/8"x3 3/8"x23" (36x86x585) 1"x3 3/8"x35 3/4" (24x86x908) WM - L BRACKET 51x32x82x3.175 - A100396 H32 - CROWS NEST FLOOR RAIL - W4L09021 E05 - CROWS NEST FLOOR SUPPORT - W4L09024 1"x3 3/8"x31 1/4"...
Page 112 E03 - ANGLE SUPPORT - W4L08187 1 3/8"x3 3/8"x16 1/2" (36x86x420) SUBASSEMBLY FROM STEP 59 STEP 60 BOLT WH 5/16x2-3/4 BLK (4 PLCS) BOLT WH 5/16x2-1/4 BLK (2 PLCS) WASHER LOCK T-NUT 5/16 BLK T-NUT 5/16 BLK EXT 8x19 BLK (4 PLCS) WASHER LOCK EXT 8x19 BLK (8 PLCS)
Page 113 O08 - WALL PICKET - W4L11560 M24 - WALL PICKET - W4L08188 5/8"x1 3/8"x7 7/8" (16x34x199) 5/8"x3 3/8"x7 7/8" (16x86x199) STEP 61 SCREW PFH (18) 8x1 1/2 SCREW PFH 8x1 1/2 (18 PLCS)
Page 114 J05 - CROWS NEST WALL SUPPORT - W4L09027 1"x2 3/8"x37 1/2" (24x60x952) STEP 62 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE WASHER YOU BEGIN ASSEMBLY OF PARTS. LOCK EXT 8x19 BLK T-NUT 5/16 BOLT WH 5/16x2-1/4 SIDE HOLES IN IN BACK SIDE T-NUT 5/16 BLK (8 PLCS)
Page 115 L07 - CROWS NEST FLOOR BOARD - W4L09025 M28 - CROWS NEST FLOOR BOARD - W4L09026 5/8"x4 3/8"x31 1/4" (16x112x794) 5/8"x3 3/8"x31 1/4" (16x86x794) STEP 63 SCREW PFH (30) 8x1 1/2 SCREW PFH 8x1 1/2 (30 PLCS)
Page 116 M29 - CROWS NEST WALL RAIL - W4L09029 5/8"x3 3/8"x34 3/8" (16x86x874) TZ - L BRACKET 2.5x38x50x55 - A100340 M30 - CROWS NEST WALL RAIL - W4L09030 5/8"x3 3/8"x24" (16x86x609) STEP 64 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE WASHER YOU BEGIN ASSEMBLY OF PARTS LOCK EXT...
Page 117 M29 - CROWS NEST WALL RAIL - W4L09029 5/8"x3 3/8"x34 3/8" (16x86x874) TZ - L BRACKET 2.5x38x50x55 - A100340 M30 - CROWS NEST WALL RAIL - W4L09030 5/8"x3 3/8"x24" (16x86x609) STEP 65 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE WASHER YOU BEGIN ASSEMBLY OF PARTS LOCK EXT...
Page 118 O07 - CROWS NEST WALL BOARD - W4L09028 (13) 5/8"x1 3/8"x32 1/2" (16x34x825) STEP 66 SCREW PFH (26) 8x1-1/8" 3 TYP SCREW PFH 8x1-1/8" (26 PLCS) FLUSH PICKETT WITH TOP OF RAIL...
Page 119 H11 - ROOF SUPPORT - W4L09038 1"x3 3/8"x76 3/4" (24x86x1949) STEP 67 WASHER LOCK EXT 8x19 BLK WASHER LOCK EXT 8x19 BLK (3 PLCS) BOLT WH 5/16x3 3/4 BLK (1 PLCS) BOLT WH 5/16x4 1/4 BLK (1 PLC) LAG SCREW WH 5/16x2 BLK (1 PLC)
Page 120 H12 - ROOF SUPPORT - W4L08056 H18 - ROOF SUPPORT - W4L08162 1"x3 3/8"x39 1/2" (24x86x1004) 1"x3 3/8"x28 1/4" (24x86x717) K03 - SLIDE ARCH BOARD - W4L09041 5/8"x5 1/4"x39 1/2" (16x134x1004) STEP 68 WASHER LOCK EXT 8x19 BLK SCREW PFH BOLT WH 5/16x3 1/2 BOLT WH...
Page 121 H14 - ROOF SUPPORT - W4L08058 1"x3 3/8"x74 3/4" (24x86x1900) STEP 69 SCREW PFH 8x2 1/2 SCREW PFH 8x2 1/2 (4 PLCS)
Page 122 - METAL ROOF FULL RIB - A4M00842 - ROUND ROOF RIB CONNECTOR PLATE - A4M00844 STEP 70 LEAVE CONNECTIONS LOOSE WASHER USE A NO. 3 BOLT PTH (16) NUT LOCK 1/4 BLK FLAT 8x19 1/4x3/4 BLK BLACK PHILLIPS BIT (8 PLCS) WASHER FLAT 8x19 BLACK (8 PLCS) NUT LOCK...
Page 123 SUBASSEMBLY FROM STEP 68 STEP 71 SCREW PWH (16) 8x3/4 BLK SCREW PWH 8x3/4 BLK (16 PLCS) TIGHTEN AFTER INSTALL...
Page 124 RP07 - ROOF PANEL - W2A02189 13/16"x17 11/16"x24 7/8" (21x450x632) STEP 72 USE LAYOUT HOLES IN ROOF PANEL FOR ASSEMBLY SCREW PWH (48) 8x3/4 BLK SCREW PWH 8x3/4 BLK (48 PLCS) ROOF PARTS REMOVED FOR CLARITY...
Page 125 - ROUND ROOF PLASTIC CAP - A6P00239 STEP 73 ROUND ROOF PLASTIC CAP (1 PLC) SCREW PWH 8x1-5/8 (1 PLC) SCREW PWH 8x1-5/8...
Page 126 H15 - RAFTER - W4L08064 M15 - WALL BOARD - W4L08067 1"x3 3/8"x47 5/8" (24x86x1209) 5/8"x3 3/8"x45 7/8" (16x86x1166) M16 - WALL BOARD - W4L08068 M13 - WALL BOARD - W4L08063 5/8"x3 3/8"x34 1/8" (16x86x867) 5/8"x3 3/8"x69 1/2" (16x86x1766) M18 - WALL BOARD - W4L08151 5/8"x3 3/8"x10 1/2"...
Page 127 N01 - RAFTER CLEAT - W4L08750 5/8"x2 3/8"x3 1/8" (16x60x80) H16 - RAFTER - W4L08065 1"x3 3/8"x47 5/8" (24x86x1209) - 90° L-BRACKET - BLK - A4M00555 STEP 75 SCREW PFH 8x1 1/4 SCREW PWH 8x1/2 BLK (4 PLCS) SCREW PWH 8x1/2 BLK (4 PLCS) SCREW PFH 8x1 1/4...
Page 128 (1) RP04 - ROOF PANEL - W2A02186 (1) RP03 - ROOF PANEL - W2A02185 1 9/16"x18 3/4"x85 3/16" (40x476x2166) 1 9/16"x18 3/4"x85 3/16" (40x476x2166) STEP 76 SCREW PFH 8x1-1/2 BLK SCREW PFH SCREW PFH 8x1-1/2 BLK (12) (8 PLCS) SCREW PFH 8x2 (12 PLCS) RP04 RP03...
Page 129 (2) RP02 - ROOF PANEL - W2A02184 1 9/16"x19 1/4"x85 3/16" (40x488x2166) STEP 77 SCREW PFH (12) SCREW PFH 8x2 (12 PLCS) RP02 RP02...
Page 130 RP01 - ROOF PANEL - W2A02182 1 9/16"x11 5/16"x85 3/16" (40x287x2166) STEP 78 RP01 RP01 SCREW PFH SCREW PFH 8x2 (8 PLCS)
Page 131 K01 - ENTRY RAIL - W4L09013 B16 - POST - W4L09033 5/8"x5 1/4"x39 5/8" (16x134x1008) 3"x3"x74 1/8" (76x76x1882) M01 - FLOOR SUPPORT - W4L09012 B18 - POST - W4L09034 5/8"x3 3/8"x40 3/8" (16x86x1024) 3"x3"x74 1/8" (76x76x1882) M31 - LADDER KICKER BOARD - W4L09032 K12 - BASE BOARD - W4L08263 5/8"x3 3/8"x39"...
Page 132 K01 - ENTRY RAIL - W4L09013 5/8"x5 1/4"x39 5/8" (16x134x1008) B15 - POST - W4L08266 3"x3"x74 1/8" (76x76x1882) M06 - FLOOR SUPPORT - W4L09020 5/8"x3 3/8"x40 3/8" (16x86x1024) B17 - POST - W4L08276 3"x3"x74 1/8" (76x76x1882) K12 - BASE BOARD - W4L08263 5/8"x5 1/4"x39"...
Page 133 K13 - BASE BOARD - W4L09010 5/8"x5 1/4"x37 7/8" (16x134x962.7) STEP 81 WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x3 1/2 BOLT WH 5/16x3 1/2 BLK (8 PLCS) WASHER LOCK EXT 8x19 BLK (8 PLCS)
Page 134 M05 - FLOOR SUPPORT - W4L09014 K02 - ENTRY RAIL - W4L09018 5/8"x3 3/8"x36 5/8" (16x86x929) 5/8"x5 1/4"x36 5/8" (16x134x929) STEP 82 BOLT WH 5/16x3 1/2 BLK (4 PLCS) LAG SCREW WH 5/16x1 1/2 WASHER LOCK EXT 8x19 BLK LAG SCREW WH 5/16x1 1/2 BLK (4 PLCS) WASHER LOCK EXT 8x19 BLK (8 PLCS)
Page 135 H23 - FLOOR SUPPORT - W4L08282 1"x2 3/4"x36 5/8" (24x70x931) STEP 83 FLUSH ON BOTTOM SCREW PFH SCREW PFH 8x2 (4 PLCS)
Page 136 H22 - FLOOR SUPPORT - W4L08279 H21 - FLOOR SUPPORT - W4L08277 1"x2 3/4"x3" (24x70x76) 1"x2 3/4"x30 5/8" (24x70x779) EJ - L BRACKET 54x67 - GRN - A100053 STEP 84 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE BOLT WH WASHER YOU BEGIN ASSEMBLY OF PARTS.
Page 137 L03 - FLOOR BOARD - W4L08280 M25 - FLOOR BOARD - W4L08281 5/8"x4 3/8"x39" (16x112x992) 5/8"x3 3/8"x39" (16x86x992) STEP 85 SCREW PFH (36) 8x1 1/2 SCREW PFH 8x1 1/2 (36 PLCS)
Page 138 H19 - HAND RAIL - W4L08269 1"x3 3/8"x89 3/4" (24x86x2279) H20 - HAND RAIL - W4L08273 1"x3 3/8"x65 7/8" (24x86x1674) STEP 86 IT IS RECOMMENDED THAT YOU PLACE ALL T-NUTS BEFORE YOU BEGIN ASSEMBLY OF PARTS. WASHER LOCK EXT 12x19 BLK HOLES DOWN IN BOTH BOARDS WASHER (10)
Page 139 (12) FA - QUICK LINK - A100069 STEP 87 INSTALL HARDWARE USING PRE-DRILLED LOCATIONS - EYE BOLT, LAG THREAD, 7/32 WIRE, 2-1/8" OAL - (12) H100632 (12) - WASHER FLAT 7x21 - H100122 WASHER FLAT 7x21 (12 PLCS) EYE BOLT, LAG THREAD, 7/32 WIRE, 2-1/8" OAL (12 PLCS) QUICK LINK (12 PLCS)
Page 140 EJ - L BRACKET 54x67 - GRN - A100053 STEP 88 BOLT WH 5/16x1 3/4 T-NUT 5/16 BOLT WH 5/16x1 3/4 BLK (3 PLCS) L BRACKET 54x67 - GRN (3 PLCS) T-NUT 5/16 BLK (3 PLCS)
Page 141 Q01 - FLOOR BOARD - W4L08283 1"x4 3/8"x30 3/4" (24x112x780) - CLATTER BRIDGE STRAP - A6P00243 STEP 89 BOLT WH 5/16x3/4 BLK BOLT WH 5/16x1/2 BLK NUT BARREL WH 5/16x7/8 WASHER LOCK EXT 12x19 BLK CLATTER BRIDGE STRAP (2 PLCS) FLOOR BOARD (2 PLCS) NUT BARREL WH 5/16x7/8 BLK...
Page 142 H24 - FLOOR BOARD - W4L08284 1"x3 1/4"x34 3/4" (24x82x883) H25 - FLOOR BOARD - W4L08285 1"x3 1/4"x30 3/4" (24x82x780) STEP 90 BOLT WH (22) 5/16x3/4 BLK WASHER (22) LOCK EXT 12x19 BLK NUT BARREL (22) WH 5/16x7/8 BOLT WH 5/16x3/4 BLK (22 PLCS) WASHER LOCK EXT 12x19 BLK (22 PLCS)
Page 143 (12) - CLATTER BRIDGE ROPE - A6P00245 STEP 91 NOTE: TO INSURE YOUR PLAYSET MEETS SAFETY STANDARDS, THE DISTANCE FROM THE BRIDGE SURFACE TO THE BOTTOM OF THE GUARD RAIL SHOULD NOT EXCEED 24". KNOT PLACEMENT SHOULD BE ADJUSTED TO MEET REQUIREMENT. BOTTOM OF GUARD RAIL BRIDGE SURFACE...
Page 144 H26 - PICKET - W4L08287 1"x3 3/8"x24 3/8" (24x86x620) STEP 92 TYP. (4 SPCS) SCREW PFH 8x1 1/2 (12 PLCS) SCREW PFH (12) 8x1 1/2...
Page 145 (1) 4 FT. LADDER ASSEMBLY STEP 93 BOLT WH 5/16x1 1/4 WASHER LOCK EXT 8x19 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x1 1/4 BLK (2 PLCS)
Page 146 FX - HAND GRIP METAL GREEN 381 c/c - A100118 STEP 94 HAND GRIP METAL GREEN 381 c/c (4 PLCS) LAG SCREW WH 5/16x1 1/2 LAG SCREW WH 5/16x1 1/2 BLK (8 PLCS)
Page 147 WN - METAL RUNG 920 - A4M00899 STEP 95 LAG SCREW WH 5/16x1 1/2 LAG SCREW WH 5/16x1 1/2 BLK (8 PLCS) METAL RUNG 920 (4 PLCS) 254 mm [10 in] (4 SPCS)
Page 148 (1) SLIDE ASSEMBLY STEP 96 BOLT WH 5/16x1/2 1 in T-NUT 5/16 6 in SLIDE ASSEMBLY DRILLING PATTERN USE A 7/16" OR 10 MM DRILL BIT. BOLT WH 5/16x1/2 (3 PLCS) T-NUT 5/16 (3 PLCS)
Page 149 (1) ROCK WALL ASSEMBLY STEP 97 BOLT WH 5/16x1 1/2 WASHER LOCK EXT 8x19 BLK T-NUT 5/16 T-NUT 5/16 BLK (2 PLCS) BOLT WH 5/16x1 1/2 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS)
Page 150 O70 - SLIDE MOUNTING BOARD - W4L09040 5/8"x1 3/8"x20 3/8" (16x34x517) (1) 10' VAC SLIDE STEP 98 SCREW PFH 8x1 1/8 159 [6 (4 PLCS) BOLT WH 5/16x1 O70 BOARD LOCATION NUT BARREL WH 5/16x5/8 79 [3 O70 BOARD LOCATION 217 [8 SCREW PFH 8x1 1/8...
Page 151 (1) CORNER SWING BEAM ASSEMBLY STEP 99 REMOVE (4) CORNER BOLTS AND LOOSEN THE 2 BOLTS ON THE BRACKET TO INSTALL SWING BEAM BOLT HEX 5/16x4 BLK (4 PLCS) WASHER SPLIT 5/16 BLK (4 PLCS) WASHER FLAT 8x27 BLK (4 PLCS)
Page 152 DP - SWING SEAT GREEN - A100027 FA - QUICK LINK - A100069 - TRAPEZE - A6P00034 EF - CHAIN GREEN 57" - A100047 KN - CHAIN GREEN 31" - A100177 STEP 100 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK...
Page 153 FX - HAND GRIP METAL GREEN 381 c/c - A100118 STEP 101 LAG SCREW WH 5/16x1 1/2 LAG SCREW WH 5/16x1 1/2 BLK (4 PLCS) HAND GRIP METAL GREEN 381 c/c (2 PLCS)
Page 154 FX - HAND GRIP METAL GREEN 381 c/c - A100118 STEP 102 LAG SCREW WH 5/16x1 1/2 LAG SCREW WH 5/16x1 1/2 BLK (2 PLCS) HAND GRIP METAL GREEN 381 c/c (1 PLC)
Page 155 - HAND RAIL SPLINTER GUARD - A6P00248 - ARCH RAIL SPLINTER GUARD - A6P00246 - ROCKWALL ARCH RAIL SPLINTER GUARD - A6P00247 STEP 103 CENTER SPLINTER GUARDS IN OPENINGS SCREW PWH (42) 8x7/16 ARCH RAIL SPLINTER GUARD (1 PLC) ROCKWALL ARCH RAIL SPLINTER GUARD (1 PLC) ARCH RAIL SPLINTER GUARD (3 PLC)
Page 156 (10) - GROUND STAKE REBAR - A4M00527 Anchoring Instructions STEP 104 BOLT WH (10) 5/16x1/2 TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. WASHER USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES. (10) LOCK EXT 12x19 NOTE:...
Page 157 Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.
Page 158 NOTES:...
Page 159 NOTES:...
Page 160 NOTES:...

Backyard 1801011 Owner's Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Backyard 1801011

Summary of Contents for Backyard 1801011