Hyundai HYCH7070 User Manual page 14

4.2.4. Disengage the belt drive by pushing
the lever at the back of the housing
down. Loosen the clamp using the lock
nut which holds the discharge chute on
the machine. The place the discharge
chute onto the machine. Tighten down
the bolts, washers and nuts. Slide clamp
over the top of the discharge chute and
fasten lock nut.
4.2.5. Place feed hopper onto the machine
and ensure it is sitting on the wear plate
before tightening it with bolts, washers
and nuts securely.
We recommend that you have
someone help you lift the
hopper in place and support it
until it is secured to the
chipper.
Page 14