Turning The Instrument On/Off; Function Buttons - AEMC 1110 User Manual

1.4. Turning the Instrument ON/OFF

1.5. Function Buttons

Button Function

Short press selects the type of illumination source: incandescent (default), fluorescent, or
LED. (See Appendix §A.1.)

Long press (>2 seconds) enters MAP mode.

Short press stores the measurement and date in the instrument's memory.
MAP mode: adds a measurement to the measurements in the MAP (§3.1.3).

Long press starts/stops a recording session.

Short press turns on back-lighting.

Long press toggles between lux (lx) and foot-candles (fc).

Short press freezes the display.

Long press activates/deactivates Bluetooth.

Short press enters MAX AVG MIN mode (§3.1.2); measurement values continue to be
displayed.
Second press displays the maximum value.
Third press displays the average value.
Fourth press displays minimum value.
MAX
AVG
Fifth press returns to normal measurement operation.
MIN

Long press exits MAX AVG MIN mode.
In MAP mode, pressing
the MAP measurements.
Lightmeter Data Logger Model 1110

ON: Press the button for >2 seconds.

OFF: Press the
ON. Note that you cannot turn OFF the instrument when it is in
HOLD or in recording mode.
If the screen to the left appears during start-up, a recording session was
still in progress the last time the instrument was turned OFF. This screen
indicates the instrument is saving the recorded data.
Do not turn OFF the instrument while this screen is displayed; otherwise
the recorded data will be lost.
displays in turn the maximum, average (mean), and minimum of
button for >2 seconds when the instrument is
8