Table of Contents
Advertisement
2.3. Instrument Date/Time
1. Select the instrument in the Data Logger Network.
2. In the menu bar, select Instrument. In the drop-down menu that appears, click Set Clock.
3. The Date/Time dialog box appears. Complete the fields in this dialog box. If you need assistance, press F1.
4. When you are finished setting the date and time, click OK to save your changes to the instrument.
2.4. Auto OFF
By default, the instrument automatically turns OFF after 3 minutes of inactivity. You can use the Data Logger
Control Panel to change the Auto OFF interval, or disable this feature, as instructed by the Help that comes with the
software.
When Auto OFF is disabled, the symbol
2.5. Measurement Units
The
button on the instrument front panel allows you to toggle between lx (lux) and fc (foot-candles) for
measurement units. You can also set this through the Data Logger Control Panel.
2.6. Light Source Type
The
button cycles through the three available light source options (incandescent, fluorescent, or LED). You
can also set this through the Data Logger Control Panel.
11
appears in the instrument LCD screen.
Lightmeter Data Logger Model 1110
Advertisement
Table of Contents
