Mpeg-Ts - Niagara GoStream Mini 200 Manual

4.2 MPEG-TS

This section shows how to play MPEG-TS from VLC. Please make sure that SDI / HDMI source
is connected to GSM 200 correctly before starting.
1. Start the VLC player and select Open Network Stream as before.
2. Enter the TS IP address from the encoder. Note that the syntax is udp://@225.1.1.10:2010
for a multicast address. For unicast to a PC you can use a short version udp://@1234 where
1234 is the port number. The encoder must have the IP address of the computer you are
streaming to.
[NOTE]
 Multicast UDP streaming address range: 224.0.0.0 to 239.255.255.255.
Page 18 of 26