Advertisement
T
S
URNING A
TATION
A
V
DJUSTING THE
Rotate
counterclockwise until it clicks. Then adjust
VOLUME
to a comfortable listening level. To turn off the
VOLUME
station, rotate
clockwise until it clicks.
VOLUME
C
A
ALLING
NOTHER
1. Set the channel selector to the channel (A or B) for the
station you are calling.
2. Press
. The station that is on and set to the
CALL
selected channel sounds a tone.
3. Hold down
and speak in a normal voice. When
TALK
you finish speaking, release
response. Ô
M
ONITORING
You can set any station so it continuously transmits sounds
from the area where it is located to another station. For
example, you could set the station in a baby's bedroom,
then use the station in the kitchen to monitor the sounds. Ô
1. Press
on the station in the area you want to
LOCK
monitor. The TX indicator lights. Ô
2. Set the channel selectors on both stations to the same
channel.
3. When you finish monitoring, release the lock by
pressing
or
TALK
CALL
are monitoring. The TX indicator turns off. Ô
U
A
SING
DDITIONAL
You can add additional stations to your intercom system as
long as they transmit on the same frequency. The stations
and their box are labeled to indicate each station's
frequency – A (200 kHz), B (270 kHz). Stations in the same
box have the same frequency.
Be sure the letter on the stations you plan to add matches
the letter on your current stations. If you want to set up a
separate intercom system, however, be sure it operates on
a different frequency.
O
O
N AND
FF
OLUME
S
TATION
and listen for the
TALK
on the station in the area you
S
TATIONS
/
Ô
NOTE
• Only one party can talk on a
channel at a time.
• The TX indicator on the station
you are using remains lit as long
as you hold down TALK or
CALL, or when you press
LOCK.
• Set the channel selector back to
your designated channel after
you finish talking, so others can
easily reach you.
• You can monitor only one
station at a time.
• The TX indicator stays lit until
you press CALL or TALK. This
lets you know that the station is
transmitting.
• After pressing LOCK on a
station, you cannot call or talk to
that station until you press
TALK or CALL to release the
lock.
Care
Keep the intercom dry; if it gets wet,
wipe it dry immediately. Use and
store the intercom only in normal
temperature environments. Handle
the intercom carefully; do not drop it.
Keep the intercom away from dust
and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
Service and Repair
If your intercom is not performing as
it should, take it to your local
RadioShack store for assistance. To
locate your nearest RadioShack, use
the store locator feature on
RadioShack's website
(www.radioshack.com), or call 1-800-
The Shack (843-7422) and follow the
menu options. Modifying or
tampering with the intercom's internal
components can cause a malfunction
and might invalidate its warranty and
void your FCC authorization to
operate it.
Ô
3
Advertisement
