Table of Contents
Advertisement
1. Introduction Assembly
1.1 General Information
This equipment should be installed, inspected, maintained and operated in
accordance with EN1176-7 guidelines.
Before installation work commences, please check that you have all of the
equipment and fixation components in the parts list provided (see Tables 3-1
and 3-2).
Please consider that the installation has to be carried out only on even
terrain (max. slope up to 3%).
Any spare parts that may be required can be obtained directly from your
supplier.
Following installation, complete assembly instructions, maintenance
instructions and a maintenance record must be sent to the operator who
must confirm receipt in writing. See the last page of this document.
All nuts and bolts are hot-dip galvanised or stainless steel.
One of the characteristics of stainless steel is that uncontrolled cold
welding may occur when the nuts are tightened. To prevent this, it is
necessary to spray the nuts and bolts with Teflon spray or another similar
lubricant.
We hereby confirm that this play equipment has been tested and certified in
accordance with the play equipment standard EN 1176.
Drawings / Views
All optical drawings are showing only the measurements/dimensions and are
no mandatory technical views of the complete item.
We reserve the right to change technical details of our articles which are
serving for the further development of our articles and are reasonable for the
customer.
Measurement tolerances
Because of the properties and characteristics of the components, minor
measurement tolerances compared to the indication on the sketches are
possible. This concerns all shown measurements except the foundation
measurements resp. measurements below upper edge ground level/play area.
- 4 -
SPOGG Sport-Güter GmbH • Schulstr. 27 • 35614 Aßlar/Berghausen
spogg@hally-gally-spielplatzgeraete.de
www.hally-gally-spielplatzgeraete.de
T:\PLAY\Play Installation Instructions\Installation Instructions 2012-2013\20_02_116-01-en-000.doc
•
Advertisement
Table of Contents
