User Guide - INFOSEC P2 SunRise 3000 User Manual

To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
Thank you for buying this inverter. The P2 SunRise will allow you to convert the solar energy
from the photovoltaic panels into the electrical grid. We hope that this device will get you
satisfied for years. However, it should be mentioned that an inverter is a complex electronic
system which is also confronted with a wide variety of local conditions. If questions arise, do
not hesitate to call your specialized dealer. He will try to help you as quickly and
straightforwardly as possible.
Please read this user's guide carefully to get familiarized with the device. Remember to pay
special attention to the information on installing and commissioning the device.
2 . S A F E T Y I N S T R U C T I O N S – S e c u r i t y
 Risk of Electric Shock:

The inverter unit uses potentially hazardous voltages. Do not attempt to disassemble
this equipment as it does not contain accessible components that can be repaired by
users.

All repairs should be performed by qualified technicians only.

When the inverter is out of order, please refer to section 8: "P2 SUNRISE STATUS
DIAGNOSTICS AND REPAIR" and call the hot line.
 Connected products:
 When checking the voltage reading, please take into account that solar modules
supply a higher no-load voltage when temperature is low and sunlight level remains
unchanged.
 At 14 °F (-10 °C) the open-circuit voltage of the PV modules must never exceed
500 V.

Do not plug the inverter input into its own output socket.

Only appropriately licensed contractors are authorized to connect the P2 SunRise to
the grid. Consult your local authorities for specific requirements. Before connecting the
P2 SunRise to the grid, permission for the connection must be granted by the utility
company.

Good disposals of the device:

The P2 SunRise was not designed for an installation on isolated site (without any
junction box).

Disconnect the inverter from AC power before cleaning with a damp cloth (no
cleaning products).
 Do not leave any recipients containing liquid on or near the inverter.

Do not cover the inverter.
 CE conformity:
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
2
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 04 10 AA 68 203 18

User guide

This logo means that this product answers to the LVD and EMC
standards (regarding to the regulation associated with low voltage
safety and the electromagnetic compatibility).