INFOSEC P2 SunRise 3000 User Manual page 19

4 - After 5 seconds, if the DC soft start of the inverter is successful, the LCD display will
illustrate drawing D. The Green LED still flashes flickeringly.
D
5 - After 10 seconds, if the AC soft start of inverter is successful the LCD display will
illustrate drawing E.
E
6 - If the inverter is in failure (ex. Output Current Over Range), then an error code or error
status will be shown on the screen. (Ex: Drawing F)
F
7 - If start-up operation of the inverter is completely and successful. The LCD display will
illustrate drawing E.
2. Check measured values & figures detected by the P2 SunRise
If you would like to check the measured values & figures detected by the Inverter, please
use scroll up and scroll down key pads. When you use scroll down key pad, the LCD display
will illustrate as:
1 - Input DC voltage of String A, as drawing G.
G
2 - Input DC voltage of String B, as drawing H.
H
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 04 10 AA 68 203 18
19