Installing The Front Wheels; Installing The Seat - Toro H132 Setup Instructions

Assembling the Tractor

Installing the Front Wheels

1. Slide a flat washer (M16, 3mm thick) onto each spindle
(Fig. 1).
4
5
Figure 1
1. Spindle
2. Wheel
3. Flat washer
(M16, 3 mm thick)
2. Mount the wheels and secure each of them with
2 spacers (M16, 1 mm thick) and a cotter pin (Fig. 1).
3. Grease the wheels.

Installing the Seat

Attach the seat to the support plate with 4 flat washers
(M9), lock washers, and screws (M8 x 18 mm) (Fig. 2).
1
Figure 2
1. Seat Support plate
2. Flat washer (M9)
Note: Before tightening the screws, adjust the seat to a
position that is most comfortable for you.
1
3
2
4. Spacers
(M16, 1 mm thick)
5. Cotter pin
2
3
4
3. Lock washer
4. Screw (M8 x 18 mm)
Attaching the Steering Wheel
1. Rotate the steering wheel upward until it is aligned with
the steering column.
2. Secure the steering wheel with the socket pin (Fig. 3).
Figure 3
1. Socket pin
Installing the Engine Cover
1. Slide the tabs on the engine cover into the slots on the
body of the tractor (Fig. 4).
2
1
Figure 4
1. Engine cover
2. Secure the cover with 2 screws (M6 x 25 mm) (Fig. 4).
2
1
m–5980
2. Screw