KVH Industries TracVision R5SL Replacement Instructions Manual page 6

Option B - DISH 1000
DISH 1000 setup varies by region. Refer to the
map in Figure 11 to determine the appropriate
DISH 1000 satellite installation for your region.
a. Type the appropriate Satinstall command for
your DISH 1000 setup, then press Enter.
• To track the DISH 110, 119 and 129
satellites:
SATINSTALL,TRISAT,DISH
• To track the DISH 110, 119 and 61
satellites:
SATINSTALL,TRISAT,DISH61
b. Type ZAP then press Enter to restart the
antenna.
Option C - Alternate Satellites
Although most installations do not require
choosing different satellites than those listed in
"Option A - DIRECTV Ku-band HDTV" on
page 5 or "Option B - DISH 1000," you can set up
your TracVision system to track a pair of
alternate satellites. Follow the steps below to
configure the system to track satellites from the
satellite library.
a. Choose your desired satellites from the
satellite library (see Figure 12)
b. Type the following command then press
Enter. Be sure to use your selected satellites'
Install Names. An example is provided in
Figure 13.
SATINSTALL,<SAT_A_NAME>,
<SAT_B_NAME>
NOTE: Select the satellite you want to track first as
"SAT_A". Once the procedure is complete, the
TracVision system will begin tracking that satellite.
c. Type ZAP then press Enter to restart the
antenna.
6
Figure 11 DISH 1000 Satellite Coverage Map
Figure 12 Satellite Library
Satellite
DIRECTV 72 ° W
DIRECTV 101 ° W
DIRECTV 110 ° W
DIRECTV 119 ° W
DISH Network 61 ° W
DISH Network 110 ° W
DISH Network 119 ° W
DISH Network 129 ° W
ExpresssVu 82 ° W
ExpressVu 91 ° W
None
Figure 13 Example of Satellite Installation
Installing DIRECTV 101 and DIRECTV 119
HALT
SATINSTALL,DSS_101,DSS_119
ZAP
= DISH 61
Satellite
Recommended
Install Name
DSS_72
DSS_101
DSS_110
DSS_119
ECHO_61
ECHO_110
ECHO_119
ECHO_129
EXPRESSVU
EXPRESSTV
None