Sennheiser PXC550 Instructions Manual page 19

Getting started
Pairing t he headphones wit h a Bluet oot h device using NFC
Ensure that the headphones and the
when performing this procedure.
1. Activate the NFC function on your smartphone.
2. Lightly tap the smartphone to the panel on the left
Once the connection is established, you hear the voice prompts
and the 5-LED-array repeatedly flashes white in a running display. The
headphones are in pairing mode.
At this point, if you decide to not proceed with the pairing, just press the
Sound button once. You will hear the voice prompt
after a few seconds.
3. Click if a pairing confirmation dialog appears on the screen of your
" Ye s"
smartphone (this step may vary depending on your smartphone).
If pairing is successful, you hear the voice prompt
flashes white 3 times.
Menu
Menu
NFC on
NFC o
NFC o
› power on ‹
› pairing ‹
If no connection is established, you hear the voice prompt "no connection".
After attempting to connect for 5 minutes, pairing mode is terminated and
the headphones return to the disconnected state.
off and repeat the pairing procedure.
switch are in the "on" position
Bluet oot h
ear cup of the headphones.
" pairing cance lle d"
" co nne cte d"
Connect to Bluetooth device?
Yes
No
› connected ‹
Switch the headphones
" pairing" ,
and an LED
L
Left
3X
PXC 550 | 17