D-Link DW-290 User Manual page 10

The module is only used or configured with antennas provided. Do not use other antennas
that have not been approved or tested with the MINI PCI card. Doing so will violate the grant
of authorization approval and could result in a system exceeding the RF Exposure
Requirements or the FCC radiation limits.
The module is properly label and if being installed inside a product, were the Module's FCC
ID is not visible, then an external label must be place on the outside of the device, stating the
following:
"Contains Transmitter Module FCC ID: KA22001120013-1"
The FCC warning statements and compliance statements found in the user manual for the
module must be replicated in the manual for the host equipment, specifically those related to
RF exposure and Indoor Use only.
The module is used as a mobile device. The final configuration, where the module will be
installed, must meet the 20-cm requirement for it to be classified as mobile. The final
configuration must, also, be in compliance with the RF exposure requirements. The module
is not approved for portable applications. If portable application is desired, then a separate
FCC equipment authorization is required.
The module is installed inside an enclosure that cannot be easily open or accessible to the
user, so that the antenna(s) provided cannot be easily change by the user.