Tad Setup And Basic Operation; Setting The Number Of Rings; Setting The Remote Operation Security Code - Radio Shack TAD-1010 Owner's Manual

43-771.fm Page 22 Friday, August 13, 1999 2:59 PM

TAD SETUP AND BASIC OPERATION

SETTING THE NUMBER
OF RINGS
The TAD is preset to sound two rings
before it answers the first call. Follow
these steps to change the number of
rings (two rings, four rings, or toll-
saver).
Note: If you plan to check your messag-
es by long distance, set the number of
rings to toll-saver.
1. Press and hold
SETUP
onds. The TAD beeps and
the current ring setting appear on
the display.
MULTI-USER
DIGITAL ANSWERING SYSTEM
MULTI FUNCTION DISPLAY
ERASE ON/OFF
REPEAT STOP PLAY SKIP
2. Press or
REPEAT
the desired ring setting.
3. Press or wait 3 seconds to
STOP
exit the setup sequence. Or, press
again to set the remote
SETUP
operation security code.
22
for 2 sec-
rt and
MAIL BOX
MEMO
ANNC.
MEMORY
SETUP
VOLUME
to scroll to
SKIP
SETTING THE REMOTE
OPERATION SECURITY
CODE
The remote operation security code
permits remote access to the TAD.
Your remote operation security code
can be any number from 00 to 99.
Note: The remote operation security
code default setting is 99.
Follow these steps to change the re-
mote operation security code.
1. Press and hold
current remote operation security
code appears on the display.
MULTI-USER
DIGITAL ANSWERING SYSTEM MULTI FUNCTION DISPLAY
ERASE ON/OFF
REPEAT STOP PLAY SKIP
2. Press or
REPEAT
the desired two-digit code number.
3. Press or wait 3 seconds to
STOP
exit the setup sequence. Or, press
again to set the day and
SETUP
time.
until the
SETUP
MAIL BOX
MEMO
ANNC.
MEMORY
SETUP
VOLUME
to scroll to
SKIP