43-1086.fm Page 7 Tuesday, August 17, 1999 2:39 PM
3. Insert the supplied AC adapter's
barrel plug into the
on the back of the base.
4. Route the adapter's cord through
the slot on top of the base and
through the left slots on the bot-
tom of the base.
5. Plug the short modular cord into
the wall plate jack.
6. Align the base's keyhole slots with
jack
DC IN 9V
7. Press and lift out the handset
8. Plug the adapter into a standard
9. Lift the base's antenna to a verti-
the wall plate studs and slide the
base downward to secure it.
holder, rotate it 180°, then snap it
back into place so it holds the
handset.
AC outlet. The POWER indicator
on the base lights.
cal position.
7