4-Way Conferencing - Radio Shack ET-685 Owner's Manual

43-685.fm Page 20 Thursday, July 8, 1999 7:50 AM
CONFERENCE
CONF/DELETE
3. Once you have the second party on
the line, press
( on the handset) to
CONF/DELETE
bring in the first party. Both line indi-
cators on the base light green. The
handset display shows
ence) above Line 1 Line 2
you are making a conference call
using the handset,
Base) and Line 1 Line 2
are using the speakerphone for con-
ferencing.
4. To end the conference call, press
one line button, then the other. If you
want to hang up one line and con-
tinue talking on the other, press the
line button you want to hang up.
If you want to talk on one line with-
out disconnecting the other, press
or
HOLD HOLD/CANCEL
button for the line you want to talk
on. To return to a 3-way conversa-
tion, press
CONFERENCE
.
DELETE

4-Way Conferencing

Follow these steps to use both lines and
the ET-685's intercom function to set up
a four-way call (see "Using the Paging/
Intercom Features" on Page 22).
20
1. Make a 3-way conference call. (See
2. Press
CONFERENCE
(Confer-
if
or
(Conf
if you
3. To answer the page press
, then the
or
CONF/
Note: You can also make a conference
call using both the ET-685 and an exten-
sion phone. (See "Using the ET-685 with
Extension Phones" on Page 21.)
"3-Way Conferencing" on Page 19.)
on the handset
INTCM/PAUSE
or on the base to page
INTERCOM
the other keypad.
INTERCOM
INTCM/PAUSE
The two outside lines are automati-
cally put on hold, but the parties on
both lines can talk with each other.
on the handset, or
PAUSE
on the base, then press
COM
on the handset or
DELETE
on the base.
ENCE
To end the conference call, press
and on one keypad,
LINE 1 LINE 2
then press on the other key-
LINE 2
pad.
If you want to hang up one line and
continue talking on the other, press
the line button that you want to hang
up.
INTCM/
INTER-
CONF/
CONFER-