Table of Contents
Advertisement
43-686.fm Page 8 Friday, September 10, 1999 3:13 PM
1. Insert the two tabs at the top of the
narrow end of the supplied bracket
into the base's upper tab slots as
shown, then press down on the
bracket's latches and insert them
into the clip slots.
2. To connect the phone to a two-line
phone jack, plug one end of the sup-
plied long modular cord into the
jack on the back of the
LINE 1/2
phone.
Note: If you connect the phone to a
two-line phone jack with a two-line
cord, do not connect another (third)
phone line to the
TEL LINE 2
the phone will not operate properly.
Instead, you can connect another
phone device such as a fax machine
or modem.
8
To connect the phone to two one-
line phone jacks, plug one end of
the supplied short two-line modular
cord into
another cord (not supplied) into the
TEL LINE 2
To connect the phone to a single
one-line phone jack, plug one end of
the supplied long modular cord into
the
TEL LINE 1/2
Note: If you connect the phone to a
TEL
single one-line phone jack, do not
press the unused line button or you
might hear feedback.
3. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
jack or
and plug
TEL LINE 1/2
jack.
or
jack.
TEL LINE 2
jack on
DC IN 9V
Advertisement
Table of Contents
