Table of Contents
Advertisement
43-1051.fm Page 15 Tuesday, August 17, 1999 1:08 PM
Note: If three quick beeps sound,
you have made an error and the
number was not stored. Start
again from Step 2.
For each stored number, write the per-
son's or company's name next to the
appropriate location number on the
memory dialing card. We recommend
you use a pencil in case you want to
change the number later.
To erase a stored number, simply
store a new number in its place.
Entering a Pause
In some telephone systems, you must
dial an access code (
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number. However, you should
also store a pause after the access
code to allow the outside line time to
connect.
To do so, press
REDIAL
priate place to enter a 4-second pause.
For a longer pause, press
ditional times.
Dialing a Memory Number
To dial a number stored in memory,
press
tone, press
memory location number for the num-
ber you want to dial.
Chain-Dialing Service
Numbers
Memory
When calling special services (such as
Dialing Card
alternate long distance or bank by
phone), dial the service's main number
first. Then, at the appropriate place in
the call, press
ber for the location where the addition-
al information is stored.
Testing Stored Emergency
Numbers
If you store an emergency service's
number (police department, fire de-
partment, ambulance) and you choose
to test the stored number, make the
test call during the late evening or early
morning hours to avoid peak demand
, for example)
9
periods. Also, remain on the line to ex-
plain the reason for your call.
at the appro-
ad-
REDIAL
. When you hear a dial
TALK
and enter the
MEMORY
then the num-
MEMORY
15
Advertisement
Table of Contents
