– user guide Contents ORDERMAN DON overview .......…………………..4 Back view of ORDERMAN DON........... 5 General Parts included, warranty........……………... 6 Correct handling Safety precautions, care of the unit......……… 7 Battery use Charging and exchanging......……………………….. 8 Getting started............……... 9 Setup-menu Display-settings..........……………….. 10 Power-settings ...........…………….
– user guide ORDERMAN DON overview Ordercard reader – optional (integrated in the housing ) On/Off button touch-Display fax-function power Off-function printing function touch-pad – menu card area connection for the charging contacts for the power supply unit charging station (optional)
This manual describes the operation of ORDERMAN DON. Software functions are described in the user manual of your EPOS system. Parts included With your ORDERMAN DON, you will have received a power supply unit, a rechargeable battery (accumulator), a touch-pen and this user guide. Warranty Repairs should be carried out by your ORDERMAN dealer.
Safety precautions ORDERMAN DON should be used only with an ORDERMAN DON battery resp. with an ORDERMAN DON power supply unit and with the entry pen of the ORDERMAN DON touch pen. ORDERMAN DON should never be exposed to rain, hail or snow.
Charging Connect the original power supply unit to the underside of the ORDERMAN DON (see also page 4). The charging procedure of the battery (accumulator) inside the unit is shown by the filling battery symbol. A complete charging procedure takes about 4 hours.
– user guide Getting started To start the operation with ORDERMAN DON, insert the battery and press the On/Off-Button. Before the first operation, it is advisable to do a complete charge of the battery (see page 8). After having switched on the unit for the first time, you get the information of the version of the operating system.
QUIT MENU For the confirmation of the changing of all the settings, you have to press the SAVE-button ! The sub-menu Password… contains specific settings, which are carried out by your Orderman dealer. Touch - calibration: By pressing the menu-button Touch Calib. or by pressing the On/Off-button and the touch at the same time, until the information Calibrate…...
– user guide Change of the ORDERMAN DON menu card The changing of the ORDERMAN DON menu card has to be done in a clean and dry place. Switch off the unit and take out the battery. 2. unlock direction 1.
16 hours (depending on the use of fully charged battery the backlight) charging time for battery with power supply unit of ORDERMAN DON: 4 hours with charging station ORDERMAN DON: 60 minutes weight handheld device 195 g...
In accordance with EC Directive R&TTE Directice 1999/5/EC Radio and Telecommunications Terminal Equipment Elektromagnetic Compatibility 89/336/EWG amended by 93/31/EWG Ò The Device ORDERMAN OM-DON Is developed, designed and manufactured in accordance with the above mentioned EC – guideline under the sole responsibility of Fa.
(contact also your responsible Orderman dealer). The software functionality operates incorrectly: Contact your Orderman dealer or refer to the software user manual. ORDERMAN DON can not be switched on: The Battery is missing or has to be recharged with the power supply unit or placed in the charging station (optional).
Need help?
Do you have a question about the DON and is the answer not in the manual?
Questions and answers