Advertisement
NEO-SLIM TRI
NO POWER TO UNIT
ERRATIC CONTROL WHEN IN DMX
CLEANING AND MAINTENANCE
We recommend periodic maintenance to ensure your fixture remains as good as the day you purchased it.
Ensure ventilation points are free of blockages, such as dust, balloons and small children.
Check this every month to prevent unit from possible overheating.
Clean external housing once a month with a damp cloth, a small amount of household detergent can be used to
remove buildup of oils, dust and death star debris,
Do not use solvents or acid/alkaline solutions to clean, doing so will damage the fixture.
SUPPORT AND ENQUIRIES
EMAIL
PHONE
DLB@NEO-NEON.COM
+86 137 6072 6377
DLD@NEO-NEON.COM
NEO-NEON ENTERTAINMENT DIVISION
www.neo-entertainment.com
Neo-Neon LED Lighting International LTD.
Gong He Town, He Shan City
Guangdong, P.R.C. 529728
CHECK CABLES FOR CONTINUITY REPLACE IF NECESSARY.
CHECK THE POWERCON IS CONNECTED CORRECTLY, INSERT THE POWERCON AND
TWIST IT APPROX TEN DEGREES, IT SHOULD "CLICK" INTO POSITION.
CHECK FUSE AND/OR POWER SOURCE.
ENSURE YOUR DMX NETWORK IS TERMINATED AT THE END OF THE CHAIN WITH AN
XLR TERMINATION PLUG.
CHECK POLARITY OF DMX CABLES.
WWW.FACEBOOK.COM/NEONEONENTERTAINMENT
USER MANUAL V1.1
Page.10
Advertisement
