Radio Shack ET-1106 User Manual page 35

900 mhz digital cordless telephone with caller id and call waiting
Table of Contents

Advertisement

43-1106.fm Page 35 Wednesday, April 26, 2000 10:30 AM
Problem
Call is noisy.
Handset sound flutters or
fades.
Can make calls, but tele-
phone does not ring.
Can receive calls, but cannot
make calls.
Solution
Do not place the base near appli-
ances or large metal objects.
Keep the handset away from interfer-
ence sources such as computers,
remote control toys, wireless micro-
phones, wireless alarm systems, wire-
less intercoms and room monitors,
fluorescent lights, and electrical appli-
ances. If the interference is severe,
turn off the interfering device.
Hang up and redial the number.
Be sure the battery pack is charged.
Fully extend the handset's antenna
vertically.
Move the handset closer to the base.
Check with your telephone company
which may be using unusual ringing
methods. Your telephone is designed
for standard straight-line bridged ring-
ing.
Make sure the ring type is not set to
OFF
.
TONE/PULSE
Set dial type (
the type of service you have (see
"Setting the Dialing Mode" on
Page 16.)
Troubleshooting
) for
35

Advertisement

Table of Contents
loading

Table of Contents