Test Mode - Lipman Nurit 3010 User Manual

Test Mode

Only NURIT programmers use this menu for testing purposes.
RADIO TEST (Relevant to NURIT 2070, 2090, and )
This menu is applicable to the NURIT 2070 and 2090 (radio terminal). It
allows viewing of the radio information. The sub-menus are as follows:
Radio RSSI
This shows the radio strength signal (coverage area). The RSSI should be
a six or greater to obtain good reception, and base station will always
differ, depending on location. To check radio signal:
1. At "CREDIT.....SALE, ACCOUNT ?", press <MENU/ESC>.
2. Terminal will display:
MENU SCREEN:
1. Reports
2. Merch. Params
3. Merch. Options
Use the <FORCED> key to scroll to
<ENTER>.
3. Terminal will display:
RADIO TESTS:
1. Radio RSSI
2. Host Radio Ad
3.
Radio Info
4. Press <ENTER>, terminal will display:
RADIO RSSI:
BASE STN:
Keep in mind that Base Station and RSSI will vary according to
location.
3. Press <MENU/ESC> three times to exit menu.
NURIT /3010  User Manual
6. RADIO TEST
14
0
082-32-001
and press
59