Sar Data - Motorola A1200 Motomanual

Specific Absorption Rate Data
14.Specific Absorption Rate Data
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR

14SAR Data

EXPOSURE TO RADIO WAVES
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed limits for exposure
to radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government and by the Canadian
regulatory authorities. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age or health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg1
Tests for SAR are conducted using standard operating positions accepted
by the FCC and by Industry Canada with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as
to use only the power required to reach the network. In general, the closer
you are to a wireless base station, the lower the power output.
Before a phone model is available for sale to the public in the U.S. and
Canada, it must be tested and certified to the FCC and Industry Canada
that it does not exceed the limit established by each government for safe
exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) reported to the FCC and available
for review by Industry Canada. The highest SAR value for this model phone
when tested for use at the ear is 0.65 W/kg, and when worn on the body, as
described in this user guide, is 0.49 W/kg. (Body-worn measurements differ
among phone models, depending upon available accessories and
regulatory requirements).2
126
SAR Data
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
governmental requirements for safe exposure. Please note
that improvements to this product model could cause
differences in the SAR value for later products; in all cases,
products are designed to be within the guidelines.
The World Health Organisation has stated that present
scientific information does not indicate the need for any
special precautions for the use of mobile devices. They note
that if you want to reduce your exposure then you can do so
by limiting the length of calls or using a 'hands-free' device
to keep the mobile phone away from the head and body.
Additional Information can be found on the websites of the
World Health Organisation (http://www.who.int/emf) or
Motorola, Inc. (http://www.motorola.com/rfhealth).
_______________________________________________________________________________________________
* The tests are carried out in accordance with international
guidelines for testing. The limit incorporates a substantial
margin for safety to give additional protection for the public
and to account for any variations in measurements.
Additional related information includes the Motorola testing
protocol, assessment procedure, and measurement
uncertainty range for this product.
** Please see the Safety and General Information section about
body worn operation.