Extra Applications; Voice Commands - Motorola A1200 Motomanual

extra applications

voice commands

You can use voice commands to make calls,
open phone applications, and perform many
basic phone functions. You can perform voice
command functions when the phone flip is
open or closed.
Note: Not all phone languages support voice
recognition and voice commands.
load voice recognition
To use voice commands with your phone, you
must load the voice recognition application
each time you turn on the phone.
Press and hold the voice recognition (VR) key
on the side of your phone until the Loading VR
message appears on the screen.
When your phone shows Load Successful, you
can start using voice commands. If your
phone indicates that loading failed, try again
to load the voice recognition application.
use voice commands
After loading the voice recognition application
on your phone, press and hold the VR key
until the phone sounds an alert tone. Speak a
voice command as described below, then
release the VR key to perform the
corresponding function.
The voice command function operates in two
modes: name/instruction mode, and digit
mode. The default operating mode is
name/instruction. When you speak the
command "Open Digit Dial" or "Open Dial
extra applications 105