Motorola A1200 Motomanual page 108

Pad, " your phone switches to digit mode so
you can speak a phone number you want to
dial.
Note: Your phone remains in digit mode for a
few seconds after each number recognition,
and then automatically returns to
name/instruction mode.
voice command list
This section lists key voice commands. To see
a complete list of voice commands, tap
T Phone Settings, tap Voice Command, then tap
Commands List.
Press and hold the VR key, and speak the
voice command as described to perform the
corresponding function. If your phone does
not recognize a spoken voice command, it
prompts you to repeat the command.
"<contact name> + Mobile (Cellphone,
Call) / Work (Office) / Home" – Your phone
106 extra applications
displays the corresponding number listed in
your address book. Press the VR key to dial
the number.
Tip: Voice recognition is greatly improved
when you store both the first and last name of
contacts in the address book. You must say
the name as it appears in the contact list (for
example, "John Smith" or "Smith, John, "
depending on how you have set up the
contact list sort order).
"Open Digit Dial / Open Dial Pad" – Puts
your phone in digit mode to dial a phone
number. When your phone displays the phone
keypad, press and hold the VR key and speak
the phone number you want to dial. Release
the VR key. Your phone recites the number
you spoke, and displays the number on the
keypad. If the number is correct, press the VR
key or speak "Dial Out" to call the number. If
the number is incorrect, press and hold the