Table of Contents
Advertisement
a. When the machine starts sending out beeping sound, and the filter net reset
indictor light flashes with red color, it reminds you to replace the filter nets. When
finished replacing the filter nets, please press the filter net reset button for a few
seconds.
b. When the machine is under normal working mode, you can press the filter net
reset button to control the ON/OFF of the Anion function. Press the button once to
start the Anion function. the indicator light will be on blue color. Press the button
again and the light and the Anion function will be off.
25
5. Maintenance and cleaning methods
Pull out the power plug before cleaning.
Please do not put the product in water or any liquid.
Please do not use cleaning agents with high abrasiveness, corrodibility or
inflammability (such as decolorizer or alcohol) to clean any part of this product.
Only pre‐filter net could be washed. Compound filter nets cannot be washed.
Clean the air purifier
Clean inner side and outer side of air purifier regularly to prevent dust gathering.
1. Use soft and dry clothes to remove dust on the air purifier.
2. Use soft and dry clothes to clean air inlets and air outlets.
Clean air quality sensor
Clean the air quality sensor every two months to ensure the air purifier could work
with the optimum performance. Please clean more regularly if the air purifier is used
in dusty environment.
26
Advertisement
Table of Contents
