Table of Contents
Advertisement
Phone—The security code is required whenever a new SIM card is inserted.
Use the following to set your security level.
1
Select Menu > Settings > Security settings > Security level.
2
At the prompt, enter the security code (default 12345), and select OK >
Off, Memory, or Phone.
Access codes
SECURITY CODE
The security code (5–10 digits) controls access to features such as the security
level and is supplied with the phone. The preset code is 12345.
If you enter the wrong security code five times in succession, you will not be able
to enter a code for five minutes, even if you power off the phone between
incorrect entries.
Once you change the security code from its preset of 12345, keep the new code
secret and in a safe place separate from your phone. Use this procedure to change
your security code.
1
Select Menu > Settings > Security settings > Access codes > Change
security code.
2
At the prompt, enter the current security code (default 12345), and follow
the prompts.
PIN CODE
Before you can change your PIN code (4–8 digits), you need to enable PIN code
request. See "PIN code request" on page 59.
1
Select Menu > Settings > Security settings > Access codes >
Change PIN code.
2
At the prompt, enter the current PIN code, and follow the prompts.
PIN2 CODE
The PIN2 code (4–8 digits) is required for features such as fixed dialing. If you
enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked
and you will have to enter the PUK2 code.
The original PIN2 code must be obtained from your service provider.
Use this procedure to change your PIN2 code.
1
Select Menu > Settings > Security settings > Access codes >
Change PIN2 code.
2
At the prompt, enter the current PIN2 code, and select OK.
3
At the prompt, enter the new PIN2 code, and select OK.
4
At the prompt, enter the new PIN2 code again, and select OK.
62
Copyright © 2004 Nokia
Advertisement
Table of Contents
