Selecting A Language; Telephone Operation; Making And Receiving Calls; Selecting The Channel - Radio Shack 43-3814 Owner's Manual

If your calling area requires 10-digit dialing
including area code, do not enter the area
code but leave this option blank.
To store your area code:
1. Lift the handset and hold down
until the menu appears.
or 9 9 9 9 twice to select
2. Press
3
3. Press , then enter your three-
SELECT
digit area code. If you make a mistake,
repeatedly press
move the cursor over the incorrect digit,
then enter the correct number.
Note: If an area code is already stored,
it appears on the display. To delete the
area code, press
then enter your area code. Or you can
6/* or #/7#to move the
use
TONE/
cursor and edit the area code.
ˆ

Telephone Operation

MAKING AND RECEIVING
CALLS
To make a call, lift the handset and press
JWba JWba
JWba JWba
. and the current volume setting
TALK
(see "Setting the Handset Volume" on
Page 12) appear on the handset, and the
base's CHARGE/IN USE indicator lights.
Then dial the number. The number displays
on the handset as you dial, then the call's
elapsed time appears.
You can also dial the number before you
press . If you make a mistake,
TALK
repeatedly press
DELETE
entry, then enter the correct number. You
can also hold down
DELETE
entire number.
When you receive a call,
appears. Lift the handset from the base and
CALL ID
ý7h[Wý9eZ[ ý7h[Wý9eZ[
ý7h[Wý9eZ[ ý7h[Wý9eZ[
.
6 7 to
or
TONE/ /* #/
three times,
DELETE
to erase the wrong
to delete the
?dYec_d]ý9Wbbý ?dYec_d]ý9Wbbý
?dYec_d]ý9Wbbý ?dYec_d]ý9Wbbý
Telephone Operation
4. Press to store the area code,
SELECT
then press
CALL ID
to the base to clear the display.

SELECTING A LANGUAGE

You can set the display's language to
English or French. To select the language:
1. Lift the handset and hold down
until the menu appears.
or 9 thee times to move the
2. Press
4
BWd]kW][ BWd]kW][
BWd]kW][ BWd]kW][
cursor to
3. Press to select
SELECT
<h <h <h <h$ $ $ $ ý ý ý ý
(French).
4. Return the handset to the base or press
to store the new setting.
CALL ID
press . If auto talk is on, just lift the
TALK
handset from the base or press any key.
To end a call, place the handset on the base
or press .
TALK

SELECTING THE CHANNEL

The phone scans 40 channels (frequency
pairs used between the base and the
handset) and automatically selects a clear
channel when you make or receive a call.
If you hear other conversations or excessive
noise during a call, press
IYWdd_d] IYWdd_d] IYWdd_d] IYWdd_d]
different channel.
phone searches for a clear channel. If the
handset is too far from the base, the channel
might not change. Move closer to the base
and try again.
or return the handset
CALL ID
.
ý;d] ý;d] ý;d] ý;d]
(English) or
to select a
CH
appears as your
11