Roli Lightpad Block Manual page 7

MIDI-over-Bluetooth
BLOCKS supports MIDI-over-Bluetooth and connects to any compatible MIDI-over-Bluetooth
enabled iOS or OSX device and app. The Lightpad Block must be in pairing mode to do this.
3.5 Product Registration and Setup
Registering on NOISE.fm makes it possible to store and retrieve your projects and other NOISE
app data in the cloud. You can also easily share data with other users and browse additional
content all on NOISE.fm (more on this later in this manual).

Download NOISE from the Apple App Store

Turn on Bluetooth on the iOS device

Launch NOISE

Within NOISE sign in to register with an existing ROLI ID
-OR-

Create a new ROLI ID on NOISE.fm or
o
Enter your first and last name
o Enter a valid email address
o
Enter a password (must be alphanumeric and contain at least one capital letter and
number)

Register BLOCKS (See next segment)
-OR-
Play with NOISE (Skip to "Learn")

Connecting and Registering Blocks
Now that you have registered an account and chosen to register Blocks please follow the prompts
on screen and outlined below.

Switch your Blocks on. If you are registering additional Blocks you may turn them all on
to register them simultaneously.

You do not need to connect additional Blocks via Bluetooth as long as you have a
Lightpad Block connected via Bluetooth. Additional Blocks connect directly to your
Lightpad Blocks via the DNA connectors.

Open NOISE, press the Settings cog in the top-right corner of NOISE and select
'Connect BLOCKS'.

Choose the Lightpad Block from the Bluetooth MIDI Devices screen to complete MIDI-
over-Bluetooth pairing. Your Lightpad Block will be listed as 'Lightpad Block XXXX'
My ROLI