Advertisement
The headset's visual indicators:
Headset mode
Headset indicator
Power Off
OFF (no charger)
Charging in Process
ON (charger plugged in, or headset placed in
base)
Charging Complete
OFF (charger plugged in, or headset placed in
base)
Pairing Mode
ON (no charger) with headset boom arm opened
Pairing Successful
Series of 10 rapid fl ashes
Audio Link (on a call)
Rapidly fl ashes
Headset ON, but not on a call
Continously fl ashes (slow rate)
Opened boom arm (turn ON)
Lights for two seconds
Closed boom arm (turn OFF)
Lights for two secons
Test link established
Flashes twice
The base's visual indicators:
Base's on-line indicator
On-line indicator
On-line with a call
Flashes
Base's pairing indicator
Pairing indiator
Pairing Mode
ON
Pairing Successful
Series of 10 rapid fl ashes
Base reset Successful
Light for two seconds
Base's multifunction indicator
Multifunction indicator
Battery indication
Number of lit indicators indicates level of charge
1 lit indicator = 25% charged
2 lit indicators = 50% charged
3 lit indicators = 75% charged
4 lit indicators = 100% charged
24
GN6110_contents_EU_21-10-03.indd 24-25
Hook Switch setting mode
Number of lit indicators indicates hook switch
mode:
1 lit indicator = RHL hook switch mode selected
2 lit indicators = DHSG hook switch mode
3 lit indicators = AEI hook switch mode
ALL base's indicators
All indicators
Power is turned ON
Light for a few moments.
5. Frequently asked questions
Should I unplug my telephone's line cord from the wall?
No, do not unplug your telephone's line cord from the wall. Your GN 6110 is not a
telephone, but rather works with your desk telephone. The GN 6110 base accesses the
telephone line via your existing desk telephone.
I've set up my GN 6110 but I still don't hear a dial tone?
There are several possible reasons why you do not hear a dial tone. Check that:
• The various cords are correctly set up and inserted.
• The clear dial tone adjustment (using the termination switch at the bottom of the
base) is correct.
• The power supply is correctly hooked to the base.
• You have not unplugged your desk telephone's telephone line.
What is the yellow-coloured AUX button on the bottom of the base for?
The yellow-marked AUX socket is where you may connect the (optional) GN 1000
Remote Handset Lifter's connector cord. By connecting the GN 1000, you may answer/
end calls while away from your desk.
(default)
selected
selected
25
23-10-2003, 09:39:26
Advertisement
