Important Safety - Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Deluxe Owner's Manual

ˆ
Read This First
This phone has been tested and found to
comply with all applicable UL and FCC stan-
dards.
WARNING:
To reduce the risk of fire or
shock hazard, do not expose this product to rain
or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product's enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product's case.
This symbol is intended to inform
you that important operating and
!
maintenance
included in the literature accom-
panying this product.
IMPORTANT CALLER ID
INFORMATION
To use the phone's Caller ID and Call Wait-
ing with Caller ID features, you must be in an
area where those services are available and
you must subscribe to those services
through your local phone company.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
2
Where Caller ID is offered, one or more op-
tions are generally available:
• caller's number only
• caller's name only
• caller's name and number.

IMPORTANT SAFETY

!
INSTRUCTIONS
When using your telephone equipment, ba-
sic safety precautions should always be fol-
lowed to reduce the risk of fire, electric shock
and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions
3. Never install telephone wiring during a
4. Never install telephone jacks in wet
5. Never
instructions are
6. Use caution when installing or modifying
7. Do not affix the AC power supply cord to
8. Unplug this product from the wall outlet
©
2001 RadioShack Corporation.
All Rights Reserved.
Read This First
marked on the product.
lightning storm.
locations unless the jack is specifically
designed for wet locations.
touch uninsulated
wires or terminals unless the telephone
line has been disconnected at the net-
work interface.
telephone lines.
building surfaces with metal fittings (if
the product has an AC power cord).
before cleaning. Do not use liquid clean-
telephone