You can also set the communication values by using the Keyboard's Main
Menu. The keyboard defaults are 9600 Baud, 8-bit Word Length, 2 Stop
Bits, No Parity, and No Flow Control.
Press X on the keyboard within the first two seconds when the
1.
printer/keyboard are turned on to see the Keyboard's Main Menu.
Select Setup. Press
2.
SETUP
COM2 (Scanner)
Press Enter. You see a list of communication options to change
3.
(Baud Rate, W ord Length, Stop Bits, Parity, and Flow Control).
COM2 (Scanner)
Baud Rate
Press Enter to change the Baud Rate. Use
4.
through the choices. Press Enter when the Baud Rate you need
appears. Continue through the list for the other communication
settings and make changes if necessary.
or
until you see
or
to scroll
Configuring the System C-5