Night Mode; Setting Up Dyson Link App - Dyson Pure Cool Link Operating Manual

Night mode

The night mode will dim the display and run quietly, making it ideal for use while sleeping.
When night mode is enabled (indicated by an
illuminated half moon symbol in the top right
corner of the display), the display will dim and
after 5 seconds will fade to off. The half moon
symbol remains illuminated.
If the appliance is not in auto mode, the airflow speed will reduce to level 4. When night mode is activated, if it is already below level 4, it will remain
the same. This can be manually changed if desired. The display will illuminate briefly, then fade as before. If in auto mode the airflow speed will be
reduced automatically.
Auto mode
Selecting auto mode adjusts the airflow according to the air quality in the
room.
Poor air quality
When auto mode is enabled (indicated by an A symbol in the bottom left corner of the
display), the on-board sensors will intelligently adjust the speed of the appliance according
to the air quality.
For additional control the Dyson Link app can be used to further adjust the sensitivity of the appliance.
A period of 6 days is required after the appliance is first used for the sensor to calibrate. During this period the
appliance may be more sensitive to VOCs (such as odours) than normal.

Setting up Dyson Link app

The appliance can be enhanced when connected to the Dyson Link app on your smart device.
Download the Dyson Link app,
available on iOS and Android.
Air quality improving
Select 'Add a Product' from within the app
and follow the on screen instructions.
Air quality target has been met
If the air is clean the A symbol will turn green
and the numerical display will switch off. If the air
quality worsens the A symbol will turn white and the
appliance will automatically restart cleaning the
room. While cleaning, the numerical display will
show the airflow speed.
In order to connect the appliance, you
will need the information on the front on
this manual.
7